This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit helps your washer spin and agitate properly by connecting the basket to the motor. If your washer isn’t spinning, is noisy, or wobbles too much, this part might be the fix. It’s a s...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
If your washer isn’t spinning or making strange noises, the drive belt might be worn out. This genuine replacement belt connects the motor to the drum, helping it spin and tumble your clothes properly...
This lid switch assembly is for a top load washer. The lid switch assembly detects if the washer lid is open or closed and prevents the washer from spinning when the lid is open.
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
The transmission drives the agitator and spins the basket in the washer. Possible Repair Solution For: Not washing properly, will not agitate, pumps but will not spin.
$351.02
In Stock
Questions And Answers for MVWC565FW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
59 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bernice
February 13, 2020
Lid locked light keeps blinking and does not allow me to start washing machine
For model number MVWC565FW0
Hi Bernice, thank you for your question. You can try to reset your appliance by unplugging it for about 30 minutes. If you plug it back in and still get the error, you may have to replace your lid lock as being the issue. Good luck with your repair.
4 peoplefound this helpful.
Was this helpful?
Thank you for voting!
Alfonso
February 16, 2024
after washing a load i see small pieces of black resedue left at bottom of drum
For model number MVWC565FW0
Hi Alfonso, thank you for contacting us. Based on the description that you have provided, we would recommend running an empty cycle. It will wash away all the dirt and lint. If this does not solve the problem, we would recommend replacing the lint filter, part number PS11750500, to fix the issue. It traps lint and debris from the drain water. We hope that helps!
Washer agitator goes through cycle when spin cycle should turn on it just sits no movement machine stops cycling.
For model number MVWC565FW0
Hello Robert, Thank you for the question. This sounds like an issue with the cycle timer not processing through the cycles properly. The timer is built into the control board PartSelect Number PS12114300, so the board will need to be replaced. Hope this helps!
Hello Chris and thank you for writing.
It certainly sounds like it could be a faulty or loose drive belt PS11747978, you should check for signs of damage, and replace if necessary. We hope this helps. Please contact us anytime.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
