This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
October 11, 2022
Sensing fill light flashing, doesn’t do anything. Not locked door
For model number MVWC465HW0
Hi Mike, thank you for reaching out. According to our research on the model, the Door Lock Assembly appears to be faulty and you may need to replace it with part number PS12704713. If you need help placing an order, customer service is available 7 days a week. Glad to be of help!
Bonjour, Ma laveuse ne fait plus de cycle au complet elle s'arrête à fill et quand elle a la quantité d'eau requise elle s'arrête et ne passe à wash ensuite elle se vide de son eau.
For model number MVWC465HW0
Bonjour Gisèle, Merci pour la question. Cela pourrait indiquer que la carte de commande de la minuterie PartSelect Number PS12349434 ne passe pas correctement les cycles et saute le cycle de lavage. Nous espérons que cela vous aidera !
My Maytag washer doesn't complete any cycle, no matter which setting I place it on. It will wash, drain & start a rinse cycle & then that is it.
For model number MVWC465HW0
Hello Angela, thank you for your inquiry. We would recommend checking if the machine is draining the water properly. Most of the time the machine does not complete cycles because of failed drainage. If the machine is not draining the water, we would recommend cleaning the draining hoses and tubes. Also, remove debris from the drain pump. If it does not help, the drain pump, part number PS11770076, is probably faulty. We hope this sorts out your problem!
Hi when my washer is in the spinning cycle it makes a very loud noise very loud.
For model number MVWC465HW0
Hello William, thank you for writing in. We suggest replacing this Washer Clutch Drive Pulley PS10057144. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise. It may also be the Suspension Rod Kit PS12349409. This kit includes 4 suspension rods, and 4 suspension balls. The suspension rod supports the washer tub and keeps it stable during unbalanced loads which can cause loud banging noises. We are pleased to have been able to help.
Hello David, thank you for the query. If the washer is spinning but not agitating, then the issue is with the faulty shift actuator. You may need to replace the shift actuator, part number PS11769864, to fix the issue. We hope this helps!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.