This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 9 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
In Stock
Order within the next 9 hrs and your part ships today!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$16.07
In Stock
Order within the next 9 hrs and your part ships today!
The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands
$43.01
In Stock
Order within the next 9 hrs and your part ships today!
Questions And Answers for MVW5430MW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
January 17, 2024
Hello, Went to was cloths..early this morning and No water is coming in of the washing...hot or cold.
For model number MVW5430MW0
Hello Doug, thank you for your inquiry. Based on our research, the issue is most probably with the water inlet valve, part number PS16543460. It controls the water flow into the washer. You may need to replace it to solve the problem. Glad to be of help!
My washer is not draining the water. I’ve already replaced the drain pump with a brand new one. This model doesn’t have a filter because it’s a later model washer. I’ve checked the drain hoses for clogs but all hoses drain properly. What am I missing? Thanks
For model number MVW5430MW0
Hi Wayne, thank you for contacting us. We have found that the issue is with the control board, part number PS16875465. It manages the washer's functions such as filling, washing, draining and spinning. You may need to replace the control board to fix the issue. We hope this helps, good luck with this repair!
Trying to wash on various cycles and it seems to be filling and agitating at the beginning of the cycle as it normally should. The problem is that the water never cuts off. I have to cut the water supply on the wall and unplug the washer to make it stop. The tub fills,drains and spins with no problem- as if in a normal wash cycle. It filled for the rinse cycle (water never stopped) and agitated as normal, drained and spun out the water. I had to turn the water off at the wall so that the spin cycle could finish the cycle. Any advice would be appreciated. Local service company has a 6 week waiting list for repairs!
For model number MVW5430MW0
Hello Amy, thank you for your inquiry. According to our research, the issue is most probably with the water inlet valve, part number PS16543460. It controls the water flow into the washer. You may need to replace it to fix the issue. We hope this solves your problem!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
