This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
This agitator assembly is a key component in many washing machines, designed to rotate back and forth during the wash cycle to help loosen dirt and stains from clothing. It features a central shaft wi...
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
$13.26
In Stock
Questions And Answers for MVW5035MW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glen
December 15, 2024
washer will not fill with water
For model number MVW5035MW1
Hello Glen. thank you for your question. The issue is a faulty Water Inlet Valve PS16543460. Good luck with your repair.
Lid does not lock. No visible damage to the part with magnet that goes into cabinet.
For model number MVW5035MW1
Hello Ted, thank you for contacting us. We would recommend making sure that the door is not being obstructed. If the problem persists, then you may need to check the lid lock latch assembly, part number PS17215992, to solve the problem. A malfunctioning lid lock latch assembly can most probably cause this problem. We hope this helps.
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier and only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
