This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is noisy, spins slowly, or leaves clothes soaking wet, this splutch cam kit might be the fix. It helps your machine switch between washing and spinning by connecting the motor to the ba...
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absor...
This shift actuator is an essential component in washing machines, responsible for switching the motor between spin and agitate modes while also communicating spin speed to the control board. A malfun...
Are you dealing with a faulty washplate in your washing machine? Meet the Whirlpool Washer Washplate Screw, your personal helper for securing loose or broken washplates. This genuine OEM part is highl...
This agitator assembly is a key component in many washing machines, designed to rotate back and forth during the wash cycle to help loosen dirt and stains from clothing. It features a central shaft wi...
Also known as the inside sleeve for the knob to be able to properly fit over the shaft of the switch. Sold individually.
$13.95
In Stock
Questions And Answers for MVW4505MW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
November 21, 2024
Does it have a lint filter that is cleanable.
For model number MVW4505MW2
Hello Jim, Thank you for writing. There is a filter in the bottom of the Outer Drum, PartSelect #: PS16660526. Normally it is self cleaning but over time it can get a build up. We hope this helps!
Push on, starts to sense for 7 seconds, lid does not lock and then done light comes on. I unplug power for min. and try again , sometimes lid locks but after few seconds it goes to done. Water valves never activate . I suspect a power spike during a recent thunderstorm while i was not home, maybe. Washer is 6 mo. Old
For model number MVW4505MW2
Hi Mike, thank you for reaching out. We would suggest checking the lid lock first. If it is fine, the issue could be with the control board, part number PS17917531. It acts as the brain of the appliance, managing various functions and ensuring optimal performance of the washing machine. You may need to replace it to fix the issue. We hope this solves your problem!
Washer starts to sensor and sometimes starts to add water and then all lights flash and goes to done. I unplug and wait 5 min and try again and each time i try to to restart it , it does someting a little different each time. But it will eventually flash the light for each cycle and goes done but sometimes it will not unlock lid aftet showing done.. tried several times by unplugging power for several minutes and retry
For model number MVW4505MW2
Hi Mike, thank you for the question. Check the lid lock for any fault first. If it is fine, the issue could be with the control board, part number PS17917531. It serves as the brain of a washing machine, managing various functions and ensuring optimal performance. You may need to replace it to fix the issue. We hope this solves your problem!
Hi Susie, thank you for your inquiry. According to our research, the part you are looking for is the lid lock, part number PS17215992. Glad to be of help!
Watched a video to get a general idea. Moved washer to garage. Raised lid, supported with s-hook and light chain. Front springs were easy, except no hole for the rod to hang in so used chain and small screwdriver through mounting hole. Back springs were not as easy. Finally removed the back panel to get to the rods. Bingo, much easier and only took 5 min to remove the back panel. reassemble and she works like a charm. Suggest to find a video reflecting your particular brand and model as all are similar but uniquely different. Easy project though.
Used video provided,but while reinstalling shocks pull the shock absorbers thru holes in washer deck using a stiff wire or a metal coat hanger will also work. This made installation so much easier!
