Order within the next 3 hrs and your part ships today!
Questions And Answers for MT4155SPB5
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kim
August 6, 2021
When the door is open the fan, turntable & light are on even though there is no time left & food is done. Does this mean the magnetron is also on, if so can this be dangerous? I'm going to replace the microwave as soon as i can but i'm concerned because i used it this way for a while. I did add & remove things asap & stood to the side.Help!
For model number MT4155SPB5
Hello Kim, Thank you for writing. We have researched the model you have provided and have found
the parts you are looking for are the Door Interlock Kit PartSelect Number PS373050 and PartSelect Number PS2052570. When your microwave door latches, the latch connect to the switches, which then allows the microwave to function correctly. We hope this helps.
After shopping all over town trying to find a new tray I discovered PartSelect.com, I called and ordered the tray and received it the next afternoon. It couldn't have gone smoother.
The reason the door would not open upon pressing the door opener is because the BRCKT-LATCH was broken. I discovered that after opening the microwave enclosing. The BRCKT-LATCH has two ends sticking out....each fits into a hole. One of the ends on the LATCH was broken and therefore it was not tightly fit. No upon pushing the door opener the LATCH would not function properly since it was loosely fit and hence the door would not open. To Fix this issue: 1) Buy a new BRCKT-LATCH 2) Remove the microwave enclosing. I had to use a special screwdriver, since the screws were security protected on my microwave. After removing the case, I opened the door by manually pressing the door latch upwards (please make sure that the microwave is not connected to the electric socket before removing the enclosing). 3) pull out the old LATCH from the microwave. 4) carefully insert the new LATCH. Try not to put too much pressure when trying to fit the latch, or else the ends may snap again!! 5) Close the door and try opening it by pressing the door opener. it should work now!!