MS2096HST LG Microwave - Overview

Diagrams for MS2096HST

See every part. Know exactly what you need.

Parts for the MS2096HST

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Glass Cooking Tray – Part Number: 3390W1G006B
$92.83
In Stock
Glass Cooking Tray
Part #3390W1G006B
Motor Synchronous – Part Number: 6549W1S011B
$46.15
On Order
Motor Synchronous
Part #6549W1S011B

Common Symptoms of the MS2096HST

How this model fails, and the parts that fix it.

Tray won’t turn
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Motor Burned Out On Turntable
37 of 49 people found this instruction helpful.
  • Steven from Oak Forest, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No tri p to home depot today.
Read less
Was this helpful?
Thank you for voting!
Arcing had caused burned turntable and melted connection to sec. motor.
5 of 6 people found this instruction helpful.
  • John from MOUNTAIN VIEW, CA
  • Easy
  • 15 - 30 mins
  • Screw drivers
Note: also had to replace turntable. Removed top cover using secure driver set. Placed microwave on it's front, using a soft towel. Removed edge screws from bottom plate (leaving 4 screws in center attached to heavy transformer). Separated bottom plate from body of microwave (leaving transformer wires still attached) exposing Synchrono us motor. Removed two screws holding motor and electrical plug. Swapped new motor in its place. Re-attached bottom plate with its screws. Placed microwave onto it normal position. Re-attached top cover with its secure screws. Installed new turntable inside.
Read less
Was this helpful?
Thank you for voting!
Turntable stopped turning
4 of 4 people found this instruction helpful.
  • Ed from MILLS RIVER, NC
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
Removed micro bottom - 5 screws. One screw on the motor and a clip. Reversed the sequence, turned it on and watched it turn.
Was this helpful?
Thank you for voting!
View More