MR-1646KSL LG Microwave - Overview

Diagrams for MR-1646KSL

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave Grease Filter – Part Number: 5230W1A012E
$21.95
In Stock
Light Bulb - 120V 30W – Part Number: 6912W1Z004B
$24.95
In Stock
Air Duct Bracket – Part Number: 4810W1A151A
$24.15
In Stock
Air Duct Bracket
★★★★★
★★★★★
(1)
Part #4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, and replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
Holder Assembly,Locker – Part Number: 3501W1A019D
$55.94
Special Order
Holder Assembly,Locker
Part #3501W1A019D
Mounting Plate – Part Number: 3300W0A030A
$56.05
In Stock
Mounting Plate
Part #3300W0A030A
Capacitor – Part Number: 0CZZW1H004B
$60.45
In Stock
Capacitor
Part #0CZZW1H004B
Store the electrical energy needed by a microwaves high-voltage heating system with this replacement capacitor. During cooking, the capacitor works with the transformer, diode, and magnetron to help create the energy that heats food. A faulty capacitor may be linked to no heat, loud buzzing, or a fuse that blows when cooking begins. However, these signs can also come from other high-voltage components, so proper testing is important. Microwave capacitors may hold a deadly electrical charge even after the power cord is unplugged. For this reason, testing and installation must be completed by a qualified appliance service technician.
Microwave Door Handle – Part Number: 3650W1A075H
No Longer Available
Microwave Door Handle
Part #3650W1A075H
The inner door panel covers the screws that attach door handle to the microwave, the door panels must be separated to access the screws and replace the door handle.

Common Symptoms of the MR-1646KSL

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
needed grease filters for a used over range microwave
26 of 58 people found this instruction helpful.
  • tony from kewanna, IN
  • Really Easy
  • Less than 15 mins
ordered on the part select web site, came quickly, order was correct
Was this helpful?
Thank you for voting!
One of the switches in a component that door activates when shut.
9 of 11 people found this instruction helpful.
  • Jimmy from OZARK, MO
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
Was this helpful?
Thank you for voting!
would not start.
8 of 10 people found this instruction helpful.
  • James from VIRGINIA BCH, VA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.
Was this helpful?
Thank you for voting!