MMV5000ADW Maytag Microwave - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8206232A
$10.49
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(92)
Part #8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.
Screw – Part Number: W11233072
$30.40
In Stock
Screw
★★★★★
★★★★★
(5)
Part #W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
Grease Filter – Part Number: WP56001069
No Longer Available
Grease Filter
★★★★★
★★★★★
(5)
Part #WP56001069
This grease filter is eight inches long. It is made of metal.
Ceramic Fuse - 20 amp – Part Number: WPM0805101
$16.37
In Stock
Ceramic Fuse - 20 amp
★★★★★
★★★★★
(1)
Part #WPM0805101
This ceramic microwave fuse is just over an inch long. It is white in the center, while each end is made of metal. This is a twenty amp fuse.
Black Sleeve Diode – Part Number: WPR9800486
$39.55
Special Order
Black Sleeve Diode
Part #WPR9800486
Charcoal Filter – Part Number: WP56001084
$26.47
In Stock
Charcoal Filter
Part #WP56001084
This charcoal air and grease filter is a little over ten inches long. It has a metal perimeter, a metal mesh exterior, and a black charcoal interior.
Outer Door Handle of Two Piece Door Handle – Part Number: WP56001139
$140.98
Special Order
Outer Door Handle of Two Piece Door Handle
Part #WP56001139
This outer door handle is half of a two piece door handle assembly. It is all white in color and is made entirely of plastic.
Thermal Fuse – Part Number: 56001140
No Longer Available
Thermal Fuse
Part #56001140
This part has 3/16" terminal.
MOTOR-STIR – Part Number: 56001337
$132.47
Special Order
MOTOR-STIR
Part #56001337
Microwave Door Interlock Switch – Part Number: WP56001036
$72.55
Special Order
Inner Door Handle of Two Piece Door Handle – Part Number: WP56001136
$133.24
Special Order
Inner Door Handle of Two Piece Door Handle
Part #WP56001136
This inner door handle is half of a two piece door handle assembly. It is all white in color and it is made entirely of plastic.
BLOCK-FUSE – Part Number: W10206728
$22.66
Special Order
BLOCK-FUSE
Part #W10206728

Common Symptoms of the MMV5000ADW

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
light bult needed to be replaced
222 of 329 people found this instruction helpful.
  • Deborah from Millersville, MD
  • Difficult
  • Less than 15 mins
  • Screw drivers
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Was this helpful?
Thank you for voting!
Bulb "burnt out"
98 of 165 people found this instruction helpful.
  • Joseph from Pembroke, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Was this helpful?
Thank you for voting!
no heat
28 of 28 people found this instruction helpful.
  • Lisa from PARADISE, PA
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
I looked up the #1 reason for no heat for my microwave on the site , and using my model number found that 92% of the time it was the Black Sleeve Diode. Ordered the $15 part, and installed it within 30 minutes. Most of the time was used for removing the built in microwave and removing the cover. Replaced the diode by finding it on the diagram that I printed from this site (free). Very relieved that we don't need to have our custom cabinetry re-sized to accommodate a new microwave. Thank you!
Was this helpful?
Thank you for voting!