This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
This Charcoal Filter traps grease from your oven's exhaust to help prevent it from entering the vent, which could cause damage over time. If the exhaust fan on your microwave is not working, you may n...
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be pro...
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$14.20
In Stock
Questions And Answers for MMV4203WS2
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Catherine
January 20, 2020
The tabs the screws go into on our vent grill are broken. Is there anyway to repair the vent tabs so the cover stays there, or do I have to get a brand new grill?
For model number MMV4203WS2
Hello Catherine, Thank you for the question. Unfortunately the vent will need to be replaced. We hope this helps.
Hy it turns on but not heating.Light turns on vent is also working but not heating
For model number MMV4203WS2
Hi Nawazish, Thank you for your question. There are a few parts that you could check for this issue. Please be advised, you must unplug the appliance from power and safely discharge the capacitor before attempting any repair as the capacitor can electrocute you if not properly discharged. You would be able to test these parts with a multi meter, remove them from the appliance before testing. First you should take a look at your fuse being the issue. It should be reading 0 ohms to be working correctly. You should also check your diode. You will also want to test all of your door switches to make sure that they are working. They should also be reading 0 ohms to be working correctly. If those parts are fine then the issue might either be in your capacitor or your magnetron itself. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
