Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rebecca
June 17, 2021
My Maytag microwave is not working and the code se is displayed.What do i do? is it worth fixing and is it something i can fix myself?
For model number MMV4203DB00
Hi Rebecca,
Thank you for your question. The SE error code is letting you know that you have a stuck keypad or a key short error. Unplugging the microwave, may help to reset it. Check the connections between the keypad and the electronic control board as well to make sure they are fitted properly. If the error persists, you will need to replace the keypad. We hope this helps!
what is the SEmean when it comes on when using microwave and wont let it come on?
For model number MMV4203DB00
Hello Sharon, thank you for the question. According to our research, The SE error code indicates that there is a problem with the Keypad (User Interface) or the associated wiring. We would recommend checking the wire harness that it is connected properly. If the issue still occurs, you may need to replace the control panel with the touchpad, part number PS11751315, to fix the issue. We hope this helps!
This was no big deal. Just inserted the new gadget under the turntable. It beginning turning as soon as I pressed start on the microwave.
What I was impressed with, is that I ordered it on line, and within two days my part was sitting on my front porch. I was very happy about the delivery. I live in a remote area, and didn't expect it for a week. Thank you.
We ordered part from store where we bought the microwave. We waited a week and the part was not the right one. I found the part I needed at your company. I received the part the next day. I just inserted the coupler in the hole where the other one was and fixed the problem imediately. We will buy all our parts here from now on.
I r/r the bulb cover, I then removed the burned out bulbs w/ a rag in case they broke they wouldn't have cut my fingers. You turn the bulbs lefty loosy. Installation is just the reverse. Install each bulb and turn righty titey, just snug the bulbs into place. Replace Glass cover and insert one phillips screw in plate and re-tighten
