This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This front-load door hinge is a genuine replacement component designed to support the door on compatible washers and dryers, ensuring smooth and secure pivoting during opening and closing. Constructed...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
If your front-load washer is leaking or making strange noises, this door boot seal might be the fix. It creates a tight seal between the door and the tub to keep water and detergent inside during the ...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
Upgrading your laundry room? We can help you save space effortlessly with our Whirlpool Long Vent Dryer Stack Kit. Designed specifically for certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Ing...
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
$13.00
In Stock
Questions And Answers for MHW5630HW3
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
October 9, 2023
My door lock is broken. Do you have a replacement?
For model number MHW5630HW3
Hi Tom, thank you for contacting us. The door latch you are looking for is part number PS12711558. If you need help to place an order, customer service is open 7 days a week!
Hello Pierre, thank you for reaching out. The cold water inlet valve for your model is part number PS17216730, and the hot water inlet valve is part number PS17216729. We hope this helps!
my bleach compartment always fills up with water after a wash load even though nothing was put into the compartment. This happened after using a powder bleach Oxi not liquid. whre sound i start to look as I believe there is a clog?
For model number MHW5630HW3
Hello Michael, thank you for reaching out. The siphon tube is blocked because the undissolved Oxi powder clumped into a solid paste that prevents drainage. To fix it, soak the dispenser drawer in hot water and scrub the siphon cap until the blockage dissolves. We hope this helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Maureen
May 1, 2026
Haw do you access the pump filter?
For model number MHW5630hw3
Hi Maureen, thank you for your inquiry. To remove and clean the filter on washing machine, remove the back panel. Use a drill with a quarter-inch socket driver to remove only the screws securing the panel itself. Place a pan on the floor directly underneath the filter area at the bottom of the machine to catch any water that spills out once the seal is broken. Carefully turn the filter counterclockwise to unscrew it. If water begins to flow out too quickly, tighten it back up to slow the stream, empty your pan, and repeat the process until the water is fully drained. Once the water is drained, remove the filter entirely to inspect it and clear out any trapped debris. Glad to be of help!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
