This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$9.68
In Stock
Order within the next 3 hrs and your part ships today!
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$10.25
In Stock
Order within the next 3 hrs and your part ships today!
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
$14.78
In Stock
Order within the next 3 hrs and your part ships today!
Order within the next 3 hrs and your part ships today!
Questions And Answers for MHW5630HW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
18 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
May 26, 2022
Washer not working get codes PF, :PF, BLINKING 1:15, I took clothes out of washer and scooped out water.
For model number MHW5630HW0
Hello Robert, Thank you for the question. A PF (Power Failure) error code indicates that the wash cycle was interrupted by a power failure. Touch and hold START to restart the washer cycle or press POWER to clear the display. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cecile
December 1, 2022
The wash cycle gets stopped at 1 minute left and does not completely finish. The clothes still has water in it when i check it.
For model number MHW5630HW0
Hello Cecile, thank you for contacting us. Please make sure that the washer is getting water and water inlet and outlet hoses are not blocked. We would recommend checking the electronic control board, part number PS12711817, with a multimeter to find the fault. Please reach out to customer service if you need help placing an order. Glad to be of help!
Turn on , load and press start
No 3sec timer, no start will not change
Temp spin soil steam
For model number MHW5630HW0
Hi Jeff, thank you for your question! Based on the description that you have provided, the issue seems to be with the control panel assembly, part number PS12711595, and you may need to replace it. Good luck with the repair!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
