This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$17.95
In Stock
Order within the next 4 hrs and your part ships today!
This front-load door hinge is a genuine replacement component designed to support the door on compatible washers and dryers, ensuring smooth and secure pivoting during opening and closing. Constructed...
$137.74
In Stock
Order within the next 4 hrs and your part ships today!
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
$10.95
In Stock
Order within the next 4 hrs and your part ships today!
If your front-load washer is leaking or making strange noises, this door boot seal might be the fix. It creates a tight seal between the door and the tub to keep water and detergent inside during the ...
$246.28
In Stock
Order within the next 4 hrs and your part ships today!
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
Upgrading your laundry room? We can help you save space effortlessly with our Whirlpool Long Vent Dryer Stack Kit. Designed specifically for certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Ing...
$57.15
In Stock
Order within the next 4 hrs and your part ships today!
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
$13.00
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for MHW5630HC2
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alex
October 21, 2023
My washer will not turn on at all. the outlet has power, I confirmed it. The door was locked, I had to remove the top to unlock it. And tried unplugging again and still nothing. Any help would be great. Thanks
For model number MHW5630HC2
Hi Alex, thank you for contacting us. We believe your washer is having this problem due to a faulty control panel assembly, part number PS12711861, which may need to be replaced. We hope this helps, good luck with the repair!
Hello William, thank you for your inquiry. We have researched and found that the error code D5 indicates that the door is open while the washer is running. We would recommend checking the door latch, part number PS16660426, to solve the problem. Glad to be of assistance!
On regular wash setting the machine will not spin and drain. It does on the other cycle settings.
Is it the control.panel?
For model number MHW5630HC2
Hi William, thank you for reaching out. The issue seems to be with the main control board, part number PS12711817. It is the central control system that manages all major operating functions of the washer. It coordinates critical processes such as water filling, wash action, draining, spinning, motor control, and cycle timing to ensure smooth and accurate performance throughout each cycle. You may need to replace it to fix the issue. We hope this sorts out your problem!
Washer is showing code of FL lo can you tell me what this is and how to correct thank you in advance
For model number MHW5630HC2
Hello Michael, thank you for contacting us. The FL error code means your washer is not detecting the correct amount of incoming water. Please check the water inlet hoses and make sure they are not kinked or blocked. If this does not help, the issue is probably related to the water inlet valve, part number PS12711564. It controls the water flow into the washer. We hope this helps, good luck with this repair!
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
