This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This front-load door hinge is a genuine replacement component designed to support the door on compatible washers and dryers, ensuring smooth and secure pivoting during opening and closing. Constructed...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
If your front-load washer is leaking or making strange noises, this door boot seal might be the fix. It creates a tight seal between the door and the tub to keep water and detergent inside during the ...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This po...
Upgrading your laundry room? We can help you save space effortlessly with our Whirlpool Long Vent Dryer Stack Kit. Designed specifically for certain Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Ing...
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
$13.00
In Stock
Questions And Answers for MHW5630HC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephanie
February 8, 2022
Turn on and just read error does not start to control board
For model number MHW5630HC0
Hello Stephanie, Thank you for your inquiry. We have researched the model number you have provided and we would recommend first trying a reset by unplugging the washer or turning it off at the circuit breaker for 5 minutes. Next make sure the control panel is not locked by pressing and holding the control lock assembly. We recommend checking the door lock assembly, the water inlet valves and the control panel. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Katherine, Thank you for your inquiry. The filter is in the side of the pump, and you would remove the cap to take out the filter. We hope this helps.
Gets stuck in the wash cycle replace the pump still nothing what can I check next
For model number MHW5630HC0
Hi Dale, thank you for reaching out. Based on the description that you have provided, we would recommend checking the control panel assembly, part number PS12711595. We hope this solves your problem!
Looking for paint for this washing machine drum it is slate gray I think can you give me the correct color
For model number MHW5630HC0
Hello Randall, thank you for getting in touch. The spray paint you are looking for is part number PS347824. If you need help placing an order, customer service is open 7 days a week!
Having trouble with the start up, have to unplug and replug to get it to work
For model number MHW5630HC0
Hi Pam,
Thank you for your question. If the washer will not start, we recommend checking the latch. First check and see if the door latch and the strike line up correctly and that the door is closing securely. If it is, check the latch for continuity with a multimeter on the Rx1 setting to see if it is operating normally. You should receive a reading of zero. If you get any other reading, you will need a replacement latch. We hope this helps!
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with all the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
