MHE10RXB0 Roper Microwave - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light Bulb - 40W – Part Number: 8206232A
$10.49
In Stock
Light Bulb - 40W
★★★★★
★★★★★
(92)
Part #8206232A
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The bulb attaches directly to an appropriate light socket and has a small screw-in base. To access the exterior light bulb, you will need to remove the panel on the bottom of the microwave using a Phillips screwdriver. If your exterior light bulb has not been changed before, it is probably held in place with some silicone. You will need to cut away this silicone to remove the old bulb. If you cannot access the silicone with a utility knife, it can be removed using dental floss. Once the silicone is removed, simply unscrew the old bulb, and replace it with the new one. Be sure to disconnect the power to the microwave before you begin this repair. This light bulb measures about 1 1/8 inches. We do not recommend using a higher-wattage bulb for this appliance, and can only recommend this specific bulb. If fixing the bulb does not solve your microwave light issue, it's possibly a problem with the socket, which means the socket and/or board will need to be replaced. This can be a more dangerous repair, so consult your user manual or a technician before attempting.
Microwave Top Mounting Screw – Part Number: WP8169704
$14.02
In Stock
Microwave Top Mounting Screw
★★★★★
★★★★★
(1)
Part #WP8169704
This screw is sold individually.
Dryer Screw – Part Number: W10815455
$9.85
In Stock
Dryer Screw
Part #W10815455
This tapping screw is sold individually.
Refrigerator Screw – Part Number: WP3196557
$11.93
In Stock
Door Interlock Switch Kit – Part Number: 4392027
$146.47
Special Order
Door Interlock Switch Kit
Part #4392027
This kit contains 2 switches - 15 Amp - 125/250 Volt with 3/16" terminals.
Screw – Part Number: WP98008545
$10.36
In Stock
Screw
★★★★★
★★★★★
(1)
Part #WP98008545
Sold Individually.
Fastener Screw – Part Number: 8169475
$9.84
Special Order
Fastener Screw
Part #8169475
Sold individually.
SCREW – Part Number: W11380570
$28.95
Special Order
SCREW
Part #W11380570
Sold individually. For white and almond models.
Microwave Grease Filter – Part Number: WP4358030
$25.95
Special Order
Microwave Grease Filter
Part #WP4358030
Sold individually. This metallic vent hood filter collects grease particles in the air from cooking.
Thermostat – Part Number: W10864742
$65.85
Special Order
Thermostat
Part #W10864742
Adapter - Exhaust – Part Number: 815092
No Longer Available
Adapter - Exhaust
Part #815092
Microwave Screw – Part Number: WP4158079
$6.55
Special Order
Microwave Screw
Part #WP4158079
This screw is for microwaves. A qualified technician should install this part if it requires accessing internal components of the microwave or microwave door. High-voltage capacitors can retain a lethal electrical charge even when the microwave is unplugged, and door shielding components should be tested for leaks after all door repairs. This screw is sold individually.

Common Symptoms of the MHE10RXB0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
light bult needed to be replaced
222 of 329 people found this instruction helpful.
  • Deborah from Millersville, MD
  • Difficult
  • Less than 15 mins
  • Screw drivers
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the li ght bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Was this helpful?
Thank you for voting!
Bulb "burnt out"
98 of 165 people found this instruction helpful.
  • Joseph from Pembroke, MA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed 1 screw, removed "burnt out" bulb and replaced it with new bulb.
Was this helpful?
Thank you for voting!
Microwave worked intermittently depending on how door was closed
67 of 85 people found this instruction helpful.
  • Robert from Bainbridge Island, WA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and a lso took a while to figure out that there is a plastic rod that inserts through the hole in the switch body. Once i figured this out went like a breeze. Lower horizontal switch was the bad one, but since the kit came with two switches i went ahead and replaced the upper horizontal one as well. IT appears that the horizontal switches are probably more likely to fail than the vertical switch based on the position of the switch and force angles. Works great now!
Was this helpful?
Thank you for voting!