This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This is a door hinge active with spring, for your range. The hinge controls the opening and closing of the oven door. If your oven door seems to be sticking, you may want to consider replacing this pa...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Screws are not included with the trim. Must order screws separately.
$70.02
In Stock
Questions And Answers for MGR6600FZ0
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sherian
July 21, 2021
My right my burner control made a pop sound and then fail off the inside of the knob looks fine is there anyway to see behind the post the knob goes on because I cant turn my burner on
For model number MGR6600FZ0
Hello Sherian, Thank you for the question. If the Pop came from the actual Burner, you may need to replace the Igniter. The Igniter is sold as part of the Burner and the burner will need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Hoda
November 15, 2022
I’m looking to replace a broken handle. Meaning one of the five to turn on the stove. I would really appreciate your help
Hoda
For model number MGR6600FZ0
Hello Hoda, thank you for reaching out. The part number for the knob compatible with your Maytag range is PS12074638. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Hello Dennis, thank you for contacting us. If there is no gas coming from the right front burner, then you may need to replace the burner valve, PS11751789, as a faulty burner valve can interrupt the flow of gas. If gas is coming but the burner does not light up, the issue could be due to the faulty electrode, part number PS11755874, or spark switch, part number PS11769622, of the burner. The spark switch does not come individually for one burner and comes as a whole assembly for all 4 burners. We hope that helps!
My oven will light but within a few minutes-2-3- it shuts off. We know the gas is ok because we can smell it. Do you think an ignitor is all we need?
For model number MGR6600FZ0
Hello Ginny, thank you for your question. To fix the issue, you may need to check the following parts: temperature sensor, part number PS11726314, oven safety valve and pressure regulator, part number PS11756682, and control board, part number PS12711829. We hope this sorts out your problem!
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
Replaced igniter and also DSI/direct spark igniter did not fix problem. Called out repairman turned out to be bad gas valve. Replaced that part , now stove works fine.
After reading many forums found that this error happens when trying to clean the oven and there is a failure in the latch motor to lock the oven door. It was suggested 1st to just tunr the breaker off to the over wait and then turn it back on to see if the error would clear by itself. If not then you'll have to do what I did and buy a new Latch Motor and replace it. Fairly easy to do: ) Move oven to get to the back panel ) Disconnect oven from power ) Remove the 8 screws to get the back panel off ) REmove the Latch motor screws (2) and remove the motor after twisting to get the latch rod off ) Put in new latch motor by 1st putting the latch rod in the motor assembly ) Screw the new motor in place ) Replace back panel ) Power on Oven DONE!