Models > MGD5100DW0

MGD5100DW0 Whirlpool Dryer - Overview

Sections of the MGD5100DW0

[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
Leveling Foot – Part Number: 49621
Leveling Foot
★★★★★
★★★★★
(5)
PartSelect #: PS1609293
Manufacturer #: 49621
Sold individually.
$10.80
  In Stock
Order within the next 5 hrs and your part ships today!
Idler Pulley with Bracket – Part Number: W10837240
Idler Pulley with Bracket
★★★★★
★★★★★
(29)
PartSelect #: PS11726337
Manufacturer #: W10837240
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers. Idler pulley maintains correct tension on the drive belt to spin the drum.
$34.17
  In Stock
Order within the next 5 hrs and your part ships today!
Stacking Kit – Part Number: 8572546
Stacking Kit
★★★★★
★★★★★
(6)
PartSelect #: PS990537
Manufacturer #: 8572546
This kit allows you to stack your washer and dryer to maximize your laundry space.
$61.45
  In Stock
Order within the next 5 hrs and your part ships today!
Stacking Kit – Part Number: 8541503
Stacking Kit
★★★★★
★★★★★
(6)
PartSelect #: PS888067
Manufacturer #: 8541503
This kit comes with 2 adhesive pads, 2 brackets and 4 screws. This is for stacking the appliances vertically - dryer over washer.
$66.12
  In Stock
Order within the next 5 hrs and your part ships today!
Blower Wheel – Part Number: WP697772
Blower Wheel
★★★★★
★★★★★
(7)
PartSelect #: PS11743811
Manufacturer #: WP697772
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...
$90.57
  In Stock
Order within the next 5 hrs and your part ships today!
LP GAS CON – Part Number: W11581317
LP GAS CON
★★★★★
★★★★★
(3)
PartSelect #: PS16875225
Manufacturer #: W11581317
Converts natural gas burners to liquid propane.
$99.91
  In Stock
Order within the next 5 hrs and your part ships today!
STACK KIT FOR LONG VENT DRYER – Part Number: W10869845
STACK KIT FOR LONG VENT DRYER
★★★★★
★★★★★
(2)
PartSelect #: PS12069913
Manufacturer #: W10869845
$79.75
  In Stock
Order within the next 5 hrs and your part ships today!
Side and Bottom Vent Kit – Part Number: W10470674
Side and Bottom Vent Kit
★★★★★
★★★★★
(1)
PartSelect #: PS3633049
Manufacturer #: W10470674
This kit is used for the bottom and side exhaust. The kit includes both the straight and elbow vent.
$136.63
  In Stock
Order within the next 5 hrs and your part ships today!
Metal Vent Periscope - 0-18 Inch - with Clamps – Part Number: 4396037RP
Metal Vent Periscope - 0-18 Inch - with Clamps
PartSelect #: PS2347217
Manufacturer #: 4396037RP
The actual physical measurement of this part is 23 3/4 inches and has a 2 1/2 inch clearance. If there is any excess length, it can be trimmed to fit according to your specific needs.
$81.75
  In Stock
Order within the next 5 hrs and your part ships today!
Drying Rack – Part Number: 3406839
Drying Rack
★★★★★
★★★★★
(1)
PartSelect #: PS346849
Manufacturer #: 3406839
This dryer drying rack is great for drying shoes and other items that cannot tumble dry. This dryer rack fits dryers that are 29 inches wide, have the letter "E" following the numbers in the model num...
$58.04
  In Stock
Order within the next 5 hrs and your part ships today!
Side Venting Kit – Part Number: W10323246
Side Venting Kit
★★★★★
★★★★★
(1)
PartSelect #: PS3489583
Manufacturer #: W10323246
This is a four way dryer vent kit.
$127.36
  In Stock
Order within the next 5 hrs and your part ships today!
Drying Rack – Part Number: W10322470A
Drying Rack
★★★★★
★★★★★
(1)
PartSelect #: PS3407918
Manufacturer #: W10322470A
This Dryer Drying Rack attaches to the inside of the dryer drum and remains stationary as the dryer turns so you can dry shoes, sweaters and other items that shouldn't be tumbled. This accessory can b...
$53.05
  In Stock
Order within the next 5 hrs and your part ships today!

Questions And Answers for MGD5100DW0

Be the first to ask our experts a question about this model!

Common Symptoms of the MGD5100DW0

[Viewing 3 of 3]
Noisy
Fixed by
these parts
Fixing Fixing Fixing
Show All
Drum Not Spinning
Fixed by
these parts
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
converting to LP gas
First I removed the front panel which allowed access to the burner assembly. Then I removed the gas connector and elbow from the back of the dryer. Then I removed 2 screws that hold burner assembly in place and 2 screws that hold an angle brace for the burner assembly. Had to loosen the screw that clamps around the gas pipe holding it in place clear in the back inside dryer housing. Unplugged all wiring connectors, then I removed the burner assembly and removed the 2 screws holding the burner tube to the valve. Remove the orifice and replaced with the proper size for LP gas. Then removed the blocking pin and replaced with one for LP gas. Then reassembled in reverse order. Actually pretty easy.
Parts Used:
LP GAS CON
  • Robert from Tenino, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set, Wrench (Adjustable)
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
craked blower motor
somthing fell down in the blower motor compartment and busted up the bloewr motor fan,and was making noise and out of balance.i changed the blower motor and runs like a charme
Parts Used:
Blower Wheel
  • joe from cheswick, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
63 of 142 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to change rear exhaust to the side to fit dryer into my closet.
First, I opened up the front of the dryer and then unscrewed the entire back piece. I assembled the new exhaust piece from the kit. Next, I took out the old straight rear exhaust and then replaced it with the elbow shaped left eshaust from the kit. Lastly, reattache the back and front pieces of the dryer.
Parts Used:
Side and Bottom Vent Kit
  • Mark from San Diego, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
43 of 90 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!