Models > MGC4436BDW0

MGC4436BDW0 Maytag Cooktop - Overview

Sections of the MGC4436BDW0

[Viewing 2 of 2]
Burner Box, Gas Valves, And Switches, Optional Parts Diagram and Parts List for Maytag Cooktop
Burner Box, Gas Valves, And Switches, Optional Parts
Cooktop, Burner And Grate Parts Diagram and Parts List for Maytag Cooktop
Cooktop, Burner And Grate Parts
Keep searches simple, eg. "belt" or "pump".
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$6.91
  In Stock
Spark Module - Oven – Part Number: 8215557
Spark Module - Oven
★★★★★
★★★★★
(1)
PartSelect #: PS2094592
Manufacturer #: 8215557
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
$169.18
  In Stock
Knob – Part Number: WP7733P382-60
Knob
PartSelect #: PS11744701
Manufacturer #: WP7733P382-60
Sold individually. This knob accepts a D-shaped shaft.
$13.20
  In Stock
Burner Cap - Medium – Part Number: WP74007925
Burner Cap - Medium
PartSelect #: PS11744211
Manufacturer #: WP74007925
$91.58
  Special Order
Burner Head - 12K – Part Number: WPW10406797
Burner Head - 12K
PartSelect #: PS11754345
Manufacturer #: WPW10406797
This part distributes flame evenly to your cookware.
$62.77
  In Stock
REGULATOR – Part Number: W11087445
REGULATOR
PartSelect #: PS12070643
Manufacturer #: W11087445
$240.41
  In Stock
Grommet – Part Number: WP74007705
Grommet
PartSelect #: PS11744194
Manufacturer #: WP74007705
This part is the replacement grommet for your cooktop or range. It is made of black plastic and is approximately 1 ¼ inches in diameter. This part may also be known as the cooktop burner knob gasket, ...
$11.64
  In Stock
LP conversion kit – Part Number: WP7509P103-60
LP conversion kit
PartSelect #: PS11744582
Manufacturer #: WP7509P103-60
$126.94
  Special Order
Orifice Holder with Spark Igniter - Right Front – Part Number: WP7527P028-60
Orifice Holder with Spark Igniter - Right Front
PartSelect #: PS11744613
Manufacturer #: WP7527P028-60
$88.19
  In Stock
Burner Cap - Gray - Medium – Part Number: WP74007752
Burner Cap - Gray - Medium
PartSelect #: PS11744198
Manufacturer #: WP74007752
$80.78
  In Stock
GRATE BURNER – Part Number: W11400301
GRATE BURNER
PartSelect #: PS12731250
Manufacturer #: W11400301
This square burner grate has sides measuring approximately nine inches. It is all black in color.
$140.18
  In Stock
Heavy Duty Degreaser – Part Number: 31552A
Heavy Duty Degreaser
PartSelect #: PS2360191
Manufacturer #: 31552A
16 Ounce.
  No Longer Available
Back to Top
View More

Questions And Answers for MGC4436BDW0

Be the first to ask our experts a question about this model!

Back to Top

Common Symptoms of the MGC4436BDW0

[Viewing 3 of 3]
Will Not Start
Fixed by
these parts
Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
top burners on stove won't ignite ,no clicking noise
remove small panel on right side of stove,then un clip moduke and put wires from old module to new one.
Exact fit nomproblems.
Parts Used:
Spark Module - Oven
  • scott from centreville, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
47 of 71 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gas range would not light
Replaced spark module but same problem persisted. Realized that the insulation on the spark ignitors were all cracked, causing a short.

Lesson learned: check the condition of the spark ignitors first as these have a tendency to crack. Even the smallest crack will cause a short.

Ordered new spark ignitors and plan to complete repair.
Parts Used:
Spark Module - Oven
  • Mike from Menlo Park, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
16 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My cooktop knob melted
I had used a pan too large for the middle burner - result: melted knob. Just pulled the old one off (up and straight) and then pushed the new one down firmly. Make sure the indicator line is pointing at you, so the flat side of the spindle matched the flat side of the hole on the knob. Easy peasy.
Parts Used:
Knob
  • Anna from MONROVIA, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More