This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your prod...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
This ice maker assembly is for refrigerators. Ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list o...
Sold Individually. - * Part may differ in appearance, but functions same as original.
$31.13
In Stock
Questions And Answers for MFT2673BEM10
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rodger
December 30, 2019
How do you change hose from solenoid to water filter
For model number MFT2673BEM10
Hello Rodger,
Thank you for the question. After the water supply is turned off the water lines just pull off the housing. In order to see if the housing is leaking you will need to remove it and check for any damage. We hope this helps!
I’ce maker not making ice , but we get water from dispenser
For model number MFT2673BEM10
Hello, Thank you for your question. You will need to check into your ice maker itself, as well as the valve and the hosing. If the hose is clogged it will not allow water to fill the ice maker. We hope this helps.
Was this helpful?
Thank you for voting!
Carol
February 25, 2020
How do i get to the hose to see if it’s clogged MFT2673BEM10
For model number MFT2673BEM10
Hello and thank you for writing.
Step 1
Unplug the refrigerator.
Step 2
Unscrew any connectors holding the water line in place and place a towel on the floor underneath where the water line has been disconnected.
Step 3
Push the button on the door of the fridge for water. If the water comes from the disconnected water line and spills onto the towel, it is likely that there's a blockage in the pipe between the opening and the door of the refrigerator. Otherwise, the clog is in the portion of the water line going from the wall to the refrigerator.
Step 4
Replace the connectors.
Step 5
Push the button in the door continuously if the door line was frozen until water comes out of the dispenser, leaving the refrigerator door open if possible.
Step 6
Leave the refrigerator unplugged for as long as possible, at least two hours, to allow the ice buildup to thaw if the clog is not coming from the door's water service line.
Step 7
Plug the refrigerator back into the wall, and try the dispenser after a few hours. The dispenser should be working properly and be unclogged.
We hope this information helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy. called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.