This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.
The start ...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
$35.26
In Stock
Questions And Answers for MFI2568AES
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cindy
July 9, 2021
Front control panel will not work. The lights are stuck on cube, door alarm, and reset filter button will not reset.
For model number MFI2568AES
Hello Cindy, Thank you for the question. When the front Panel is not allowing you to change functions, it is normally an indication the Low Voltage Dispenser Control Board will need to be replaced. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Tollie
July 12, 2021
My frig is not getting cold, frig and freezer and no ice, temp on door just shows settings. The whole frig doesn't get cold.
For model number MFI2568AES
Hello Tollie, Thank you for the question. With the information provided, this could indicate the Low Voltage Dispenser Control Board is defective. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jorge
January 9, 2020
Where is the defrost timer located?
For model number MFI2568AES
Hello Jorge, Thank you for the question. The timer for this model is part of the Control Board PartSelect Number PS11752535 on the back of the appliance. This electronic board manages and monitors the cooling and defrost times of your refrigerator and other functions. We hope this helps!
My plastic cover on beverage chiller cracked can it be replaced
For model number MFI2568AES
Hello Maria, thank you for reaching out. The part you are looking for is the chiller door, part number PS11743678. We hope this sorts out your problem!
The fridge has been in storage for several years and now the freezer drawer will not open at all, like it is locked. Other doors open fine. Is there a latch that might be keeping the freezer drawer from opening? It will not budge at all, but the rest of the fridge seems to be working fine.
For model number MFI2568AES
Hello,
Thank you for your question. It is likely the door hinge on either side of the drawer that is keep the freezer door shut. You may need to break the door hinges in order to fully open the door if you cannot remove the hinges as is. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!