This center crisper drawer rail supports the edges of refrigerator crisper drawers, ensuring smooth sliding and proper alignment. At 13.5 inches long, it fits between the drawers on the shelf frame. Q...
$75.51
In Stock
Order within the next 4 hrs and your part ships today!
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
$69.99
In Stock
Order within the next 4 hrs and your part ships today!
This OEM pantry door cover is designed to fit the pantry compartment of various refrigerator models, providing both protection and visibility. Constructed from durable white plastic, it features a tra...
$192.93
In Stock
Order within the next 4 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$15.95
In Stock
Order within the next 4 hrs and your part ships today!
This drawer slide rail cover is for refrigerators.
Drawer slide rail cover is a decorative trim that covers the slide rail.
Wear work gloves to protect your hands when installing this part.
$59.77
In Stock
Order within the next 4 hrs and your part ships today!
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
$55.88
In Stock
Order within the next 4 hrs and your part ships today!
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators.
T...
$163.10
In Stock
Order within the next 4 hrs and your part ships today!
This is a replacement ice maker for your refrigerator. This is the ice maker only and does not include the water valve, extension blade, or the air baffle.
$172.83
In Stock
Order within the next 4 hrs and your part ships today!
Replace your refrigerator’s damaged shelf frame with this OEM replacement, measuring 28-3/8 inches by 15-1/2 inches. Compatible with Whirlpool, KitchenAid, Maytag, and more, it supports the crisper dr...
$148.30
In Stock
Order within the next 4 hrs and your part ships today!
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
$79.64
In Stock
Order within the next 4 hrs and your part ships today!
Questions And Answers for MFI2269DRM01
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Theresa
January 7, 2022
Ice maker malfunctioning, water filling ice ben and freezing. Not making ice cubes until bin freezes total block of ice in bin
For model number MFI2269DRM01
Hi Theresa,
Thank you for your question. If your ice maker is not working correctly and is filling with water and freezing, there are some parts that you will need to check to see which one is causing the issue. You will need to check the ice maker, the water inlet valve, the fill cup and the water filter. We have included a link that you may reference on how to check these parts. We hope this helps! Good luck with the repair!
Hi Mark, thank you for your question. We have a video here that you can view for this installation: https://youtu.be/5oA-c0VklDg. Good luck with your repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Chris
February 13, 2020
I am searching for the water filter which was previously ukf8001, replaced by Whirlpool part ps11722130 this also shows no longer available. What part number do i order to replace the water filter thanks!
For model number MFI2269DRM01
Hi Chris. You can use the water filter linked below. Thank you for your question and good luck with your repair.
Need the middle part to hold the drawers. The bar that both drawers slide into. Why don't you have a phone number or at least parts you can look up to order.
For model number MFI2269DRM01
Hello Sandra, Thank you for the question. Our number 1-888-260-4310 is listed at the top of every page on our site, it is also listed in the Contact Us section. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757048. It is listed as #28 on the diagram labeled Shelf Parts. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hi, the water dispenser debit on my refrigerator is very low. I already changed the filter, but that did not solve the issue. It takes 1 min to fill a cup of water. The ice is forming. I checked the water line, there is no obstruction, and the pressure looks adequate. There is a humming noise, louder then normal, when the water dispenser is engaged. Is the inlet valve faulty ? And needs to be replaced, or what would be your advice?
For model number MFI2269DRM01
Hello Adrian, Thank you for your inquiry. The water pressure needed to run the water dispenser and ice maker needs to be between 35 and 120 PSI. You can test the water inlet valve with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
