Models > MERE1065H0WW

MERE1065H0WW General Electric Washer - Overview

Sections of the MERE1065H0WW

[Viewing 4 of 4]
Keep searches simple, eg. "belt" or "pump".
Split Ring – Part Number: WH02X10265
Split Ring
PartSelect #: PS1766022
Manufacturer #: WH02X10265
This split ring is two inches in diameter.
$18.38
  Special Order
BELT - WH1M1073 – Part Number: WW01F00345
BELT - WH1M1073
PartSelect #: PS9864414
Manufacturer #: WW01F00345
$17.96
  In Stock
Hose Clamp Kit – Part Number: WH1X2036
Hose Clamp Kit
PartSelect #: PS270806
Manufacturer #: WH1X2036
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
$11.80
  Special Order
Hub Nut – Part Number: WH01X10618
Hub Nut
★★★★★
★★★★★
(1)
PartSelect #: PS3501416
Manufacturer #: WH01X10618
This hub nut is a genuine OEM replacement part for your stackable washing machine. Removing the hub nut may require a spanner wrench, as per the manufacturer specifications. Replacing this part requir...
$22.57
  Special Order
SCREW – Part Number: WW01A00064
SCREW
PartSelect #: PS12069183
Manufacturer #: WW01A00064
$7.01
  In Stock
Wire Form Hinge - Long – Part Number: WH1X2743
Wire Form Hinge - Long
PartSelect #: PS271113
Manufacturer #: WH1X2743
$15.38
  Special Order
PLUG TUB – Part Number: WW01F01152
PLUG TUB
PartSelect #: PS11774700
Manufacturer #: WW01F01152
$9.05
  In Stock
SEAL TUB COVER – Part Number: WW01L00467
SEAL TUB COVER
PartSelect #: PS10056431
Manufacturer #: WW01L00467
  No Longer Available
TRANSMISSION PULLEY – Part Number: WH38X10018
TRANSMISSION PULLEY
★★★★★
★★★★★
(1)
PartSelect #: PS3496872
Manufacturer #: WH38X10018
$22.79
  Special Order
PLUG SEAL – Part Number: WW01F00277
PLUG SEAL
PartSelect #: PS10063500
Manufacturer #: WW01F00277
$9.05
  In Stock
HEX SCREW – Part Number: WW01A00082
HEX SCREW
PartSelect #: PS12306019
Manufacturer #: WW01A00082
$9.05
  In Stock
SUPPORT SENSOR BOARD – Part Number: WH12X10514
SUPPORT SENSOR BOARD
PartSelect #: PS3501435
Manufacturer #: WH12X10514
$11.58
  Special Order

Questions And Answers for MERE1065H0WW

Be the first to ask our experts a question about this model!

Common Symptoms of the MERE1065H0WW

[Viewing 2 of 2]
Leaking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Will not agitate
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Tub seal leaking, grinding noise on spin.
Purchased spanner wrench for tub nut wouldn’t budge, impacted off. Then spin tub took 2days to get loose, lots of WD40 , also heated up center area, used a small sledgehammer head to hit a socket on the large part of the shaft . Had to take out outer tub to replace seal and support bearing unit.
Parts Used:
Hub Nut
  • Lee from GRANDVILLE, MI
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!