This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This is a heating element compatible with various makes of ranges and ovens and is sold as an individual part. Measuring 20.5-inches wide and 20.25-inches (with terminals) long, this heating element i...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Use this scraper for your ceramic/glass cooktop. It has a retractable blade and is an all-purpose tool for cooktops, mirrors, windows and tile. Use it to also remove paint, paper, dirt, stickers and more.
$13.76
In Stock
Questions And Answers for MER8680BS0
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vicki
December 4, 2019
I have a Maytag aqualift 6.2cf range glass top. The dual burners in the front turn red very quickly even on low. Can you help me?
For model number MER8680BS0
Hi Vicki,
Thank you for your question. If the dual burners at the front of the cooktop are set on a low setting and they instead go to a high setting, then the issue is with the burner switches and they will need to be replaced. The part number listed under your model number for the burner switch is PS11754687. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Barb
December 16, 2019
I turn the oven on to 350 and it goes up to 400. If i turn it on to 325 it will be 350. What could be the problem?
For model number MER8680BS0
Hello Barb and thanks for writing.
It certainly sounds like a faulty oven temperature sensor PS11749737 check the part and replace it if needed. We hope this helps. Please contact us anytime.
2 front dual burners go to full heat on any selected temp range.
For model number MER8680BS0
Hello Daniel, Thank you for the question. This is normally an indication there is an issue with the Switch that controls the Element, PartSelect Number PS11754687. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
On pre heat takes 30 minutes or so then on bake it loses heat and does not bake at an even temp
For model number MER8680BS0
Hello Ray, thank you for the question. This is normally an indication that your oven sensor part number PS11749737 is not working properly. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope this helps!
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Took 2 screws under front edge of smooth top. Unscrewed ground wire from back of smooth top unit. Unplugged 2 wire bundles, from back. Took bad element out , put in new one. Put back together. About 10 min's tops. Easy peasy.
![](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/12348164-1-S-Whirlpool-W11171119-6-amp-quot-Surface-Element-1200-W.jpg "6" Surface Element, 1200 W – Part Number: W11171119")
