This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This thermal cut-off kit for a dryer includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse (309 degrees). This kit also includes flat heaters with jumper wires.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This high-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Fahrenheit, this piece will shu...
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance. The blower wheel spins on the motor shaft to blow air through the dryer drum and out through the exhaust.
This kit is used for electric clothes dryers, and it comes with a yellow wire nut.
$14.10
In Stock
Questions And Answers for MEDC300XW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patty
October 22, 2021
My timer switch is failing on my dryer. It will work but I have to jiggle it and pull the knob out a bit to get it to run. I would like to replace it but I'm not sure of the part number. Can you help?
For model number MEDC300XW0
Hello Patty, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11746606. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Do you carry a heating element? I seen everything else but a heating element for this model dryer
For model number MEDC300XW0
Hello Robert, thank you for getting in touch. The heating element for your model is part number PS334313. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
There is a loud squealing noise as the tub is spinning. As it runs the noise slowly goes away.
For model number MEDC300XW0
Hi Gary, thank you for your question. According to our research, you need to check your drum support, part number PS11752609. If it does not solve your problem please check your drive motor, part number PS334304. We hope this helps.
I put a ps334313 heating element in and mine only had 2 wires new one came with a wire to use am suppose to use it.
For model number MEDC300XW0
Hello Rod, thank you for reaching out. According to our research, the heating element you have mentioned is compatible with your model. The single wire is used to repair a damaged wiring connection from the motor or thermostat to the heating element. The same 2 wires will be used to connect the heating element. We have attached a relevant video to help you replace the heating element. This video may not be of the exact model, but will help you with the process. Glad to be of help!
Was this helpful?
Thank you for voting!
Fred
July 31, 2023
Dryer heats and drum turns with a light-weight load, but it will not turn with a load of one or two wet bath towels.
For model number MEDC300XW0
Hello Fred, thank you for asking. According to our research, the dryer will make attempts to move the clothes in an "on and off" condition. This will overheat the motor and trip the overload switch of the motor. We would recommend checking the drive motor, part number PS334304, to fix the issue. We hope this helps!
First tried heating element and thermal fuse with no luck. Ordered thermal cutoff and fixed problem. Had I used an ohm meter first I would have determined problem before having ordered heating element and fuse, as both had resistance. I wast just lazy and ordered the took the most common failed components first before taking dryer back off.
Pryed dryer top open and opened front door. . Unscrewed the 2 retaining screws. Pulled old switch from the wiring harness. Put new switch in place and replaced the retaining screws. Put new switch wire plug into the wiring harness. Before closing top, checked door switch function with dryer on. Dryer cut off when door open and when closed dryer started normally. . . Maint. Note instruction book should warn that letting door slam, which I did on occaision, broke the switch arm. Might save future problems.