This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$20.81
In Stock
Questions And Answers for MEDB880BW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wade
December 6, 2019
My Maytag dryer will run but it won't heat. When I start it up the sensing light will come on but then will go off. Can you help me? Wade
For model number MEDB880BW0
Hello Wade, Thank you for the question. I suggest testing the High Limit Thermostat and Thermal Cut-Off Kit, PartSelect Number PS334387 and the Moisture Sensor, PartSelect Number PS11741408. Hope this helps!
Clean lint filter light comes on but the lint screen and vent to outside are clean
is there a floe sensor?
For model number MEDB880BW0
Hello Tom, thank you for your question. We have researched your model and found that the issue is probably with the Lint Filter, part number PS1491676. If that does not take care of the issue, then the problem is most likely to be related to the Filter Sensor, part number PS11741408. If you require assistance to place an order, please contact customer service. We hope that helps!
Hi Stanley, thank you for the question. We would suggest testing the Heating Element, part number PS11746337, and the High Limit Thermostat and Thermal Cut-Off Kit, part number PS334387, for continuity with a multimeter. If there is no continuity, we would recommend replacing them. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
My dryer makes this loud noises like It's I was drying tennis shoes I could take it apart but would like to maybe diagnose and order the parts before hand.
For model number MEDB880BW0
Hi Dirk, thank you for contacting us. We would recommend checking the following parts to fix the issue: Drum Support Roller, part number PS11752609, Roller Support Tri-Ring, part number PS11755850, and Idler Pulley Wheel, part number PS11756154. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I'm looking for P/N for the door hinge. Both top and bottom. Appear to be same. Thank you.
For model number MEDB880BW0
Hello Patrick, thank you for the question. The top hinge for your model is part number PS11744886, and the bottom door hinge is part number PS2360877. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece in the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
I asked for advise, looked around and priced heating elements and thermostats. This was the best combo offered for the price given. It was shipped and received it very quick. Installed it and 5 minutes later, she was running like a champ!
