This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$20.81
In Stock
Questions And Answers for MEDB850YW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
February 11, 2020
Lint is passing the lint trap. Lint trap is intact.
For model number MEDB850YW2
Hello Paul, Thank you for the question. We suggest checking the Dryer Lint Screen Grille Part Number PS12114312 and the Housing PS12114481 for wear or damage as well. Make sure all parts are secure and the screws are in place. We hope this helps.
When i push the start button, the dryer makes a noise but will not start. I already replaced the thermistor and nothing changed.
For model number MEDB850YW2
Hello, Thank you for your question. You will need to look into the control board. That typically is a cause if the unit will not start. We hope this helps.
Was this helpful?
Thank you for voting!
Albert
May 25, 2022
Door clasp
For model number MEDB850YW2
Hello Albert, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11748369 for the female Door Catch and Part #: PS2373322 for the male Door Strike. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece in the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying!
I asked for advise, looked around and priced heating elements and thermostats. This was the best combo offered for the price given. It was shipped and received it very quick. Installed it and 5 minutes later, she was running like a champ!