This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers.
Idler pulley maintains correct tension on the drive belt to spin the drum.
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
The blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over ...
$90.56
In Stock
Questions And Answers for MED7100DC0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
March 6, 2020
In normal mode, it sprays water 4 times near end of cycle, then tumbles (with no heat) briefly then turns off. Clothes are damp and cold. Wrinkle prevent is turned off. I've turned off circuit breaker for 1 hour to reset computer with no help. Thank you.
For model number MED7100DC0
Good Day Frank. Thank you for your question in regards to your unit (Model Number MED7100DC0). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) High Limit Thermostat and Thermal Cut-Off Kit (PartSelect Number PS334387). 2) Heating Element Connection Wire Kit (PartSelect Number PS334206). 3) Internal-Bias Thermostat (PartSelect Number PS11746740). 4) Moisture Sensor (PartSelect Number PS11741408). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
My dryer is making a loud squeaking sound. Like metal scraping. Is this usually a belt or a bearing?
For model number MED7100DC0
Hello Jaime, thank you for reaching out. Based on the description that you have provided, we would recommend that you check the drive belt. If the drive belt is frayed or damaged, the dryer will be noisy as it turns. Inspect the drive belt for signs of wear. If the drive belt is worn, replace the drive belt, part number PS11748388. Inspect the idler pulley for signs of wear. If the idler pulley is worn or damaged, we suggest replacing the idler pulley, part number PS11726337. We hope this sorts out your problem!
I removed the top cover and then the back cover, released the belt tensioner and removed the drive belt. Then slid the tub out of the unit and onto the back dack. Sanded the remnents of the old seal off. Wiped the tub lip with laquer thinner and applied the "fast" drying glue supplied with the kit. Installed the seal and re-assembled the unit...works fine
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.