This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers.
Idler pulley maintains correct tension on the drive belt to spin the drum.
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
$20.81
In Stock
Questions And Answers for MED3500FW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Albert
January 22, 2020
Make dryer higher
For model number MED3500FW0
Hello Albert, Thank you for the question. If you are looking for a Leveling Foot to adjust the height, you will need PartSelect Number PS1609293. We hope this helps.
Hi there,
Our dryer door hinge seems to be loose and the bottom of the door runs and lifts when closing the door. The dryer is stacked above the washer and I believe it’s from pulling the door “down” and out and the closing the door at the lower right corner… Could I’d be the hinge needs to be replaced? Any thought's? Thank you!
For model number MED3500FW0
Hi Mike, thank you for contacting us. Based on the description that you have provided, we would recommend replacing the door hinge, part number PS11750410, to fix the issue. It attaches the door to the front panel of the washer cabinet. We hope this solves your problem!
Code f4e4 appears. Tried unplugging and replugging. Checked breakers. Code still appears.
For model number MED3500FW0
Hello Tarry, thank you for contacting us. According to our research, the error code f4e3 indicates a low or no line voltage. There may be a problem with your home power supply, keeping the dryer's heater from turning on. We would recommend checking the terminal block wiring for any damage or loose connections. If this does not fix the issue, you may need to replace the control board, part number PS16555266, to fix the problem. We hope this information helps!
Dryer comes on but drum will not start. All lights, settings etc seem fine. And the timer still counts down
For model number MED3500FW0
Hello Albert, thank you for your inquiry. According to our research, we would recommend checking the drum belt, part number PS11748388. If it is faulty, then you may need to replace it to fix the issue. We hope this solves your problem!
My maytag dryer just clicks when trying to start it. What could cause this to happen? It'll start after about 20 attempts but doesn't always run full length of time either.
For model number MED3500FW0
Hello Matthew, thank you for contacting us. We have researched the model and would recommend checking if there is lint trapped along the blower housing or the drive motor. Also, check if the door is being closed properly. If the issue remains, the problem might be with the control board, part number PS16555266. We would suggest checking it for continuity using a multimeter. We hope this helps!
I asked for advise, looked around and priced heating elements and thermostats. This was the best combo offered for the price given. It was shipped and received it very quick. Installed it and 5 minutes later, she was running like a champ!
I removed the top cover and then the back cover, released the belt tensioner and removed the drive belt. Then slid the tub out of the unit and onto the back dack. Sanded the remnents of the old seal off. Wiped the tub lip with laquer thinner and applied the "fast" drying glue supplied with the kit. Installed the seal and re-assembled the unit...works fine
1) Disconnected power cord from wall. 2) Disconnected vent hose from back of dryer. 3)Removed dryer rear panel. 4)Disengaged tension spring on idle wheel arm. 5) Removed worn idle wheel. 6)Installed new Idler wheel assembly. 7) Vacuumed dust from rear of dryer (optional, recommended). 8) Reinstalled rear cover, vent hose and power cord. Easy repair 15-30