This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is u...
This part senses the flame for heat allowing the gas valve to open.This flame sensor is three inches long and is used for many gas clothes dryers.This flame sensor assembly is made of both plastic and metal.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
This part is the replacement thermal fuse for your dryer. When you order this part, you will receive the fuse itself, as well as the bracket that mounts it to the dryer. The thermal fuse is approximat...
This conversion kit contains all parts needed to convert your gas dryer from natural gas (NG) to liquid propane (LP). This kit will work with some Samsung dryers as well. Use model # to ensure you are...
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees...
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Raymond
December 26, 2019
What is error code t-5
For model number MDE6700AYW
Hello Raymond, Thank you for the question. The T5 error code on a Maytag Neptune dryer indicates a temperature control problem, which may have to do with the thermistor or heating element. I suggest testing with a multi meter to determine what part is defective and will need to be replaced. We hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Charles
June 14, 2021
Lost power
For model number MDE6700AYW
Hello Charles, Thank you for the question. If there is no power to the appliance, you will need to test the Outlet first and check the power cord for any damage and make sure it is secure. If the appliance is getting power but will not power on, you may have a defective Electronic Control Board. We hope this helps.
Code e5 thermostat, can i just order the thermostat?
For model number MDE6700AYW
Hello Jerry, Thank you for your inquiry. E5 indicates that the thermistor sensor has failed. We have researched your model and the part number is PS11741828. Good luck with your repair.
The unit is suddenly dead. It has power at the plug and the cord looks good. I have checked the termistors, thermostats, heating element for continuity and resistance and they are good. The manual shows the same readings for the door switch both opened and closed. Doesn't seem right. I get a reading on com-nc when it is open and infinity when closed. Is there a way of checking the control panel?
For model number MDE6700AYW
Hello Mike, Thank you for your inquiry. You can check the board for any visible damage or loose connections. We would also recommend checking the flame sensor, the thermal fuse, the igniter, and the drive motor. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
My display lights up but the drum won't move. What parts would you recommend I order. My son thinks he can probably install the parts.
For model number MDE6700AYW
Hello Barbara, thank you for the question. If the dryer drum is not moving, we would recommend checking the drive belt, part number PS11750299, to fix the issue. We hope this helps!
Callled the service company to diagnose the problem. Watched him take machine apart. He found the problem. Told me the parts that I needed. Didnt know what they were. Went to partselect.com looked my model up and found parts and ordered. Followed same steps as repair guy: Two screws in back of machine then slide top off. Six screws in front to remove front door ( 4 screws on top 2 on bottom) Changed the thermostat and thermistor. Saved 320 dollars :)
Remove dryer covers and locate heater assembly. Removed heater assembly and checked visually if the heater coil is opened, I verified this with an ohm meter. Heater Continuity was OK. Next step I checked the heater sensors. Thermal fuse with bracket had no ohm meter reading between two terminals[open circuit]. Order part#35001193 "thermal fuse" with bracket from "partsSelect.com." Assemble back in reverse order. Please note that the dryer heater was filled with lint and needed a good cleaning.
First it was a process of alimination to find out why it was dropping out. After the problem was found it was just a matter of replacing the holding coil on the gas valve. Thank you fred kenney sr