This front glide kit comes with a blue plastic glide, a brown cork pad, and two metallic rivets. Two kits are required per appliance. A rivet tool is required for this installation.
$18.74
In Stock
Order within the next 8 hrs and your part ships today!
At 91-5/8 inches in length, this dryer drum belt from Maytag has five ridges. It is all black in color and is made entirely of rubber. This flat belt is 3/8 of an inch wide.
$36.18
In Stock
Order within the next 8 hrs and your part ships today!
This is a rectangle shaped lint filter screen used for some gas and electric clothes dryers. The dimensions of this lint filter screen are approximately twelve and a half inches long by seven and thre...
$56.91
In Stock
Order within the next 8 hrs and your part ships today!
This seal can be used for the front or rear drum. Adhesive is NOT included. For adhesive search: WPY055980
$20.31
In Stock
Order within the next 8 hrs and your part ships today!
Questions And Answers for MDE2600AYW
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darrell
October 31, 2022
My dryer is making a loud sqeaky noise. Do the belt need to be replaced or tighten
For model number MDE2600AYW
Hello Darrell, thank you for reaching out. According to our research on model number MDE2600AYW, the problem appears to be with the Belt, part number PS11741110. The belt needs to be replaced, if that does not help then the issue is likely to be with the Drum Support Roller Kit, part number PS1570070. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job. Thank you.