My Orders
MDB100RGW1 Uni Dishwasher - Overview
Diagrams for MDB100RGW1
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$49.59
In Stock
Dishwasher Bottom Door Gasket
Part #809006501
This gasket goes on the bottom of the dishwasher door to create a tight seal between the tub and the outer edge of the door. If the gasket is cracked or broken, it will need to be replaced to keep water from leaking out on to the floor. The gasket is approximately 23” long and is a genuine OEM part. It is recommended that once you have in...Read morestalled the gasket to leave the door closed for a few hours to make sure the gasket is properly sealed.
Read less
$40.65
In Stock
Water Inlet Valve - 120V 60Hz
Part #154637401
This dishwasher water inlet valve is a genuine OEM component designed to regulate water flow into the appliance during the fill cycle. Typically located behind the lower kickplate panel in either front corner, the valve uses solenoids to open and close, ensuring the correct amount of water enters the tub for effective cleaning. Operating ...Read moreat 120 volts and 60 Hz, this part is essential for maintaining proper dishwasher performance. Common symptoms of a faulty valve include leaking, failure to fill, poor cleaning results, or incomplete draining. Installation requires disconnecting power and water supply, and a flat blade screwdriver may be needed to access the valve. Always verify model compatibility before purchase.
Read less
$14.14
In Stock
Wheel & Bushing Assembly
Part #5304532229
The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is mad...Read moree of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it.
Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.
Read less
$61.09
In Stock
Lower Spray Arm
Part #5304518927
This lower spray arm assembly is a vital component in your dishwasher, responsible for distributing water and detergent throughout the tub during the wash cycle. Its rotating motion ensures thorough cleaning by spraying water in multiple directions. Typically mounted to a hub at the bottom of the dishwasher, a damaged spray arm may cause ...Read moreknocking sounds, restricted rotation, or poor cleaning results. Replacing it helps eliminate food residue and unpleasant odors. Installation is simple—just lift the center of the old arm to release it, and snap the new one into place. This OEM part is sold individually.
Read less
$168.69
In Stock
Door Latch and Gasket
Part #5304442175
Black in color. No longer available in almond.
This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.
$40.33
In Stock
$19.95
In Stock
Heating Element Brass Nut
Part #154106202
This nut is sold individually. It is used to install the heating element.
$35.95
In Stock
$35.15
In Stock
$29.50
In Stock
Dishwasher Water Inlet Tubing
Part #5304523457
The tubing carries water from the water inlet valve to the tub.
$164.17
In Stock
Upper Rack Assembly (Grey)
Part #5304535380
If your dishwasher’s top rack is worn or broken, this replacement rack is a great fix. Made to fit select Frigidaire models, it’s sturdy, easy to install, and helps your dishes stay in place for a better clean. The grey finish blends in nicely with most interiors. Just double-check your model number to make sure it’s the right match.
$10.95
In Stock
Manuals & Care Guides for MDB100RGW1
Click to downloadInstall
Installation Instructions
(1.24MB)
Manual
Owner's Manuals
(0.41MB)
Wiring
Wiring Diagram
(0.55MB)
Common Symptoms of the MDB100RGW1
How this model fails, and the parts that fix it.
Leaking
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Water leaking from Inlet Valve
623 of 640 people
found this instruction helpful.
Remove the bottom cover plate. Disconnect the water inlet and black rubber hose. Remove 2 mounting screws. Pull out electrical connector. Reverse order. Be sure to get the brass inlet connector really tight so it won't leak. I did the final tightning after the part is mounted. Not a bad repair at all. The only problem was that it
... Read more
leaked in the first place and messed up my subfloor and laminate flooring.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!