MAD50P1AWS Midea Dehumidifier - Overview

Diagrams for MAD50P1AWS

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Pipe Temperature Sensor – Part Number: 11201007003439
No Longer Available
Pipe Temperature Sensor
Part #11201007003439
Universal Wheel – Part Number: 12620100000015
No Longer Available
Universal Wheel
Part #12620100000015
Centrifugal Fan – Part Number: 12100103000075
No Longer Available
Centrifugal Fan
Part #12100103000075
Installation Bracket Subassembly – Part Number: 12120100000594
No Longer Available
Installation Bracket Subassembly
Part #12120100000594
Bobbin Winder – Part Number: 12120100001601
No Longer Available
Bobbin Winder
Part #12120100001601
Dobber Case – Part Number: 12120100002228
No Longer Available
Dobber Case
Part #12120100002228
Handle Of Water Tank – Part Number: 12120100005563
No Longer Available
Handle Of Water Tank
Part #12120100005563
Butt Joint Subassembly – Part Number: 12120100005983
No Longer Available
Butt Joint Subassembly
Part #12120100005983
Air Filter – Part Number: 12120100A12682
No Longer Available
Air Filter
Part #12120100A12682
Drain Connector Of Water Pump – Part Number: 12120100A12852
No Longer Available
Drain Connector Of Water Pump
Part #12120100A12852
Water Tank Subassembly – Part Number: 12120100A16382
No Longer Available
Water Tank Subassembly
Part #12120100A16382
Drain Pipe – Part Number: 12600501000024
No Longer Available
Drain Pipe
Part #12600501000024
Continuous drainage depends on a clear and properly fitted pump hose. Replace the hose if it is split, blocked, leaking, or too stiff to seal well. First inspect the pump outlet and make sure the drain path is open. Confirm the correct hose using the complete dehumidifier model number. Disconnect power and remove any stored water before installation. Do not pinch or twist the new hose. After reconnecting it, run a short test and check every fitting for leaks.