LXDT04CW Makita Impact Driver - Overview

This is Makitas Lithium-Ion charging system. This charger uses three controls to ensure the best possible charge: Temperature, Voltage, and Current. These controls are monitored by a chip on the battery, and analyzed by a CPU on the charger. This prolongs battery life, and keeps cordless power tools running at peak performance. There is ...Read morea forced air fan on board the charger, keeping batteries cool while re-charging. A 3.0 Ah battery will charge in less than 45 minutes.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Makita power tools. It is an identical replacement for a missing or damaged rubber pin that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and applicat...Read moreion of this hardware. Keep in mind this high-quality item is made of durable rubber material and is sold individually.

This item is a genuine Makita replacement part that has been OEM sourced to ensure quality. The rubber pin is intended to be used with impact drills/drivers, shears, and drywall screwdrivers. The rubber pin is used to provide spacing between the brush card and the housing assembly. This item is sold as a single part.

Genuine Makita replacement part, this item is sold individually. This part is what the battery terminals connect to. With the use of its terminals, it sends the power from the battery to electrical parts of the the tool to make it function. It is installed between the two housings to hold it in place.

This is an authentic Makita replacement part that has been sourced from the original manufacturer for use with hammer drills. The metal pan head screw is used with several different types of drills and the application of the screw can vary based on the model of equipment. The screw is sold as an individual replacement part.

This replacement tapping screw is sourced directly from original equipment manufacturer. It is specially designed for Makita power tools. It is a standard hardware which has multiple applications based on a tool. Please make sure to check appropriate diagrams for the location and use of this screw. This part is made out of metal and it is...Read more sold individually. Requires a screwdriver to tighten/loosen this screw. This is a self tapping screw can tap its own hole as it is driven into the material.

This is a Genuine OEM Sourced replacement part designed for Makita Impact Drivers. This part is made out of Metal and it is Sold Individually. This Washer helps to provide seal for the Sleeve. When replacing this part you would need a Screwdriver and Pliers.

It is a genuine high quality item that is sourced from original equipment manufacturer for use with Makita impact drivers. This flat washer is used to provide a tight seal between two connected parts, please make sure to check appropriate diagrams of your tool for correct location and use of this item. One durable metal flat washer is included per order.

This authentic o-ring is supplied by the original equipment manufacturer, it is specially designed for use with Makita impact drivers. Its purpose is to provide an air-tight seal between connected parts, please make sure to refer to appropriate diagrams of your model for the correct location and use of this hardware. Over time the materia...Read morel may wear out and crack eventually requiring a replacement to ensure the peak performance. This high-quality replacement o-ring is made of durable rubber and it is sold indiviudally.

This is a genuine Makita replacement part, it is sold individually. It is part of the bit holder. Without this Ball the bit would not stay in the holder. It is used in a number of different tools for different reasons. But it is most popular in Cordless Impact Drivers and Corded Screw Drivers. Compatible with the tools listed below. The diameter is 3.5mm.

This genuine OEM steel ball measures 5.6mm in diameter and is used in the ball bearing mechanisms or detent systems of your handheld power tools. It minimizes friction between moving parts, allowing them to move smoothly without causing excessive wear or resistance. It can also provide a reliable locking mechanism in the detent system, en...Read moresuring that adjustable parts stay securely in place during operation. Typically, you can find this steel ball inside the main housing of your power tool. It facilitates smooth rolling or sliding movements in various components like compression springs, cam clutches, barrels, or spindles. Signs of a worn or damaged steel ball include increased vibration or inconsistent locking. To check if the steel ball requires replacement, visually inspect it for any signs of wear or damage. If you are unsure about how to replace the steel ball in your machine, it is recommended to consult your user manual for instructions. Please note that this replacement part is sold individually, as your tool may need multiple steel balls. It is also crucial to make sure you have the correct size of steel ball for your specific repair.