LTG4715ST (00) LG Range - Overview

Diagrams for LTG4715ST

See every part. Know exactly what you need.

Parts for the LTG4715ST

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: EBG61305805
$59.35
In Stock
Temperature Sensor
★★★★★
★★★★★
(5)
Part #EBG61305805
This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor internal temperatures and regulate heating or cooling elements accordingly. If your appliance is experiencing inconsistent temperature control, the sensor may be defective and can be tested using a multimeter for continuity. Refer to your user manual for exact placement and diagnostic procedures. Sold individually.
Read less
SUPPORTER,LEVER – Part Number: MJH64334701
$24.15
In Stock
Oven Igniter – Part Number: MEE61841401
$317.43
In Stock
Oven Igniter
★★★★★
★★★★★
(5)
Part #MEE61841401
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner. If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.
Read less
FOOT – Part Number: 4778W1N001B
$21.95
In Stock
FOOT
Part #4778W1N001B
MOTOR,AC FAN – Part Number: EAU62343001
$97.57
In Stock
Oven Rack – Part Number: MHL63411403
$124.28
On Order
Thermostat – Part Number: 6930W1A003J
$16.45
In Stock
Thermostat
Part #6930W1A003J
Common Nut – Part Number: 1NHB0500032
$13.15
Special Order
Common Nut
Part #1NHB0500032
Power Transformer Assembly – Part Number: EBJ64465501
$65.95
In Stock
Power Transformer Assembly
Part #EBJ64465501
The spark module controls the spark for lighting the cooktop surface burners.
BURNER - RIGHT FRONT – Part Number: MBE62002902
$75.85
In Stock
BURNER - RIGHT FRONT
Part #MBE62002902
PCB ASSEMBLY,SUB – Part Number: EBR80327001
$67.05
In Stock
PCB ASSEMBLY,SUB
Part #EBR80327001
FAN,CONVECTION – Part Number: MDG62882901
$47.25
In Stock
FAN,CONVECTION
Part #MDG62882901
View More

Common Symptoms of the LTG4715ST

How this model fails, and the parts that fix it.

Little to no heat when baking
Fixed by
these parts
Fixing
Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Fixing
Show All
Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection Fan stopped working, would spin but not continuously on its own
16 of 24 people found this instruction helpful.
  • Barry from PIERRE, SD
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Read less
Was this helpful?
Thank you for voting!
Oven wouldn't ignite
11 of 22 people found this instruction helpful.
  • Martin from KEWASKUM, WI
  • Easy
  • 15 - 30 mins
  • Nutdriver
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this helpful?
Thank you for voting!
the oven knob was not working to select the desire operation
4 of 5 people found this instruction helpful.
  • Roy from MARBLE FALLS, TX
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Took off the front panel of the range and found the circuit board that operated the Oven knob selections and took it off got the part number and order it. Then just replaced it as the reverse of taking it off . The oven knob work to the desire selections on the range .
Was this helpful?
Thank you for voting!
View More