LTE4815BM (ABMLLGA) LG Range - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: EBG61305805
$59.35
In Stock
Temperature Sensor
★★★★★
★★★★★
(5)
Part #EBG61305805
This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor internal temperatures and regulate heating or cooling elements accordingly. If your appliance is experiencing inconsistent temperature control, the sensor may be defective and can be tested using a multimeter for continuity. Refer to your user manual for exact placement and diagnostic procedures. Sold individually.
Microwave Thermostat – Part Number: 6930W1A003X
$33.93
In Stock
SWITCH, ROTARY – Part Number: EBF62174906
$91.97
In Stock
SWITCH, ROTARY
★★★★★
★★★★★
(4)
Part #EBF62174906
This rotary switch helps you control the heat on your range’s surface burners. It adjusts the temperature smoothly, so you can cook with precision. If your burner isn’t responding, only works on one setting, or the knob feels loose, it might be time to replace the switch. Swapping it out is straightforward—just disconnect power, remove the old switch, and install the new one to get your range working like new.
MOTOR,AC FAN – Part Number: EAU62343001
$97.57
In Stock
Range Radiation Heater – Part Number: MEE62385201
$198.03
Special Order
Range Radiation Heater
★★★★★
★★★★★
(3)
Part #MEE62385201
A dual radiant heater supplies heat to a cooking area beneath a glass cooktop. Replacement may be needed when one zone does not warm, only the inner or outer section works, or the element has a visible break. Normal radiant burners cycle on and off, so cycling alone does not prove a failure. Check the control switch and connections first, then match the replacement by full model number, location, size, mounting points, and electrical rating. Disconnect the range at the breaker and confirm the circuit is dead before service. Handle sharp metal edges and the glass top carefully, and return every bracket, shield, and wire to its original position.
Oven Rack – Part Number: MHL63411403
$124.28
On Order
Common Nut – Part Number: 1NHB0500032
$13.15
Special Order
Common Nut
Part #1NHB0500032
RING,GUIDE – Part Number: MGZ63727001
$13.15
In Stock
RING,GUIDE
Part #MGZ63727001
KNOB ASSEMBLY – Part Number: AEZ74073404
$69.25
In Stock
KNOB ASSEMBLY
Part #AEZ74073404
Struggling with a faulty knob on your LG range stove oven? Say hello to this genuine LG Knob Assembly'a quick fix to help bring back the impeccable control over your cooking temperatures. This OEM component is specifically crafted by LG to keep your meal preparations precise and hassle-free. The balance in size and shape ensures it matches your LG stove not just in function, but also in aesthetics. It's designed for certain LG models, so do verify your model in advance to ensure perfect compatibility. Installation? It's as easy as pie. Simply pull off the old knob and snap on the new one in a swift motion, no tools required. You don't need to be tech-savvy to get your LG range stove oven working like brand-new. Take your cooking journey to new heights with smoother, accurate controls offered by this authentic LG Knob Assembly. Enjoy the satisfaction of a perfectly functioning kitchen appliance once again.
HEATER,SHEATH – Part Number: MEE62865003
$133.59
In Stock
HEATER,SHEATH
Part #MEE62865003
This sheathed heater assembly delivers consistent, controlled heat required for proper appliance operation. The protective outer sheath supports efficient heat transfer while safeguarding internal components. Replacing a failing heater restores accurate heating performance, resolves temperature loss or uneven heating, and ensures dependable operation.
BRACKET,HEATER – Part Number: MAZ63310801
$13.15
On Order
BRACKET,HEATER
Part #MAZ63310801
FAN,CONVECTION – Part Number: MDG62882901
$47.25
In Stock
FAN,CONVECTION
Part #MDG62882901

Common Symptoms of the LTE4815BM

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Convection Fan stopped working, would spin but not continuously on its own
16 of 24 people found this instruction helpful.
  • Barry from PIERRE, SD
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Unplugged oven electric and turned gas off. Removed all back covers from the unit. Removed the cover on the inside covering the burner and fan in the back of the convection oven. Removed the nut securing the fan to motor shaft with helper holding the motor. Removed the three electrical wires attached to motor, making note where they go. Removed screws mounting the motor to oven. Removed motor cooling fan and shaft spacer from old motor. Fit in same orientation on new motor. Replace all parts in reverse order, restore gas and electric, turn on and test.
Was this helpful?
Thank you for voting!
Hammer 1, Glass range top and heating element 0
24 of 56 people found this instruction helpful.
  • Richard from CHESAPEAKE, VA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution:
1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet.
2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Was this helpful?
Thank you for voting!
glass broken lower oven
2 of 3 people found this instruction helpful.
  • linda from LAKEWAY, TX
  • Really Easy
  • 1- 2 hours
  • Screw drivers, Socket set
remove door from oven.
removed screws slipped new window glass. in

very easy
Was this helpful?
Thank you for voting!