LTCS20220B (AWBCNA5) LG Refrigerator - Overview
Sections of the LTCS20220B
[Viewing 5 of 5]
Keep searches simple, eg. "belt" or "pump".
Glass Shelf Assembly
PartSelect #: PS7788910
Manufacturer #: AHT73514301
This refrigerator shelf assembly is designed to provide sturdy and organized storage within select refrigerator models. It features a clear glass pan supported by a white plastic frame, measuring appr...
$141.97
In Stock
Door Bin Shelf
PartSelect #: PS7794183
Manufacturer #: MAN62570401
Keep your fridge organized and your items secure with this translucent door shelf, designed to fit select LG refrigerators. It’s perfect for storing condiments, drinks, and other quick-grab items righ...
$115.38
In Stock
Bushing
PartSelect #: PS3524960
Manufacturer #: 4984JJ3003A
This refrigerator door hinge bushing is a durable white plastic component that provides a smooth pivot point for the hinge pin, helping keep the door properly aligned and sealed. It is commonly used t...
$13.15
In Stock
COVER ASSEMBLY,TV
PartSelect #: PS7787104
Manufacturer #: ACQ85956603
Maintain the organization and freshness of your refrigerator with this genuine cover assembly, designed to support the crisper drawer and its shelf while helping control moisture for fruits and vegeta...
$180.36
In Stock
Long Refrigerator Door Bin
PartSelect #: PS7794185
Manufacturer #: MAN62570601
This genuine refrigerator door bin provides convenient, easy-access storage for bottles, jars, condiments, and other frequently used items while helping keep the refrigerator organized. Made from dura...
$71.45
In Stock
Common Symptoms of the LTCS20220B
[Viewing 1 of 1]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
old bushing worn and broken
removed the upper freezer door to access screws to remove lower door.
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
laid bottom door on its side, removed bad bushing, put new bushing in, put bottom door back on refridge, put upper door back on fridge. Door worked easy as when new. good closure of door and story..Happy customer, and wife even happier.....thank you....
Parts Used:
-
Jerry from CORSICANA, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
23 of 43 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom door dropped slightly and bottom hinge area rubbing on steel door support
removed 3 fasteners for top door and placed freezer door aside, then removed 3 more fasteners on bottom refrigerator door and place that aside. replaced bushing on lower door bracket and reversed the above procedure to reinstall doors.
Parts Used:
-
Louis from PHILADELPHIA, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench set
12 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice maker in freezer P/NO 5988JA0002Y would leak water and make giant ice block
I ordered and replaced the ice maker. To replace:
1. Go behind refrigerator and unplug electrical cord and turn off water supply.
2. In freezer locate electrical plug for ice maker. It has two tabs on the left and right side of it. Lift the tabs and pull the plug to disconnect it.
3. Remove the three screws, 2 on top and 1 on bottom of ice maker You can actually leave the screws in place if you loosen them sufficiently and lift the ice maker off of the screws and washers.
4. Install the new ice maker using the screws and plastic washers to secure it.
5. Plug the electrical connector for ice maker into the receptacle. Note: The plug only goes one way and is keyed with different shaped plugs and holes. The wires on my plug naturally fell upside down so I had to turn the plug 180 degrees to make it fit in the slot.
6. Turn on water and check for leaks.
7. Plug back in refrigerator and you should have ice in less than 12 hours.
1. Go behind refrigerator and unplug electrical cord and turn off water supply.
2. In freezer locate electrical plug for ice maker. It has two tabs on the left and right side of it. Lift the tabs and pull the plug to disconnect it.
3. Remove the three screws, 2 on top and 1 on bottom of ice maker You can actually leave the screws in place if you loosen them sufficiently and lift the ice maker off of the screws and washers.
4. Install the new ice maker using the screws and plastic washers to secure it.
5. Plug the electrical connector for ice maker into the receptacle. Note: The plug only goes one way and is keyed with different shaped plugs and holes. The wires on my plug naturally fell upside down so I had to turn the plug 180 degrees to make it fit in the slot.
6. Turn on water and check for leaks.
7. Plug back in refrigerator and you should have ice in less than 12 hours.
Parts Used:
-
Eric from SURPRISE, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
5 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!