Is your LG Refrigerators ice dispenser giving you trouble? It could be that the Dispenser Ice Chute Door DC Motor needs a replacement. This motor is an important gadget that allows the ice door on you...
When space becomes an issue in your LG refrigerator, our LG Door Shelf Bin is your answer. This is not just any bin ? it is a genuine LG part, made to slot perfectly into the door of your fridge. Desi...
This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is nee...
We know how important it is to have chilled water on demand. That's why we're offering the LG Tank Water, a genuine LG replacement part that your fridge needs to keep your water cool and fresh. This i...
The Water filter reduces contaminants such a s lead, iron, and chlorine from drinking water. Replace every 6 months or 200 gallons for best performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keith
September 30, 2023
There is water leaking from under the refrigerator but the drain line is clear
For model number LSXS26366D
Hi Keith, thank you for the question. If you have already checked the drain line and it is not causing the issue, then you may need to check the water inlet valve, part number PS11766581, as it is most likely faulty and may need to be replaced. Please contact us anytime if you require further assistance!
This repair was easy. The ice maker assembly is basically a plug and play unit that requires first removing the ice bucket as described inside the freezer door. Next, remove several screws the support the unit, then gently lifting the ice maker assembly out, just far enough to access the 2 electrical plugs that operate the unit. Carefully unplug the old unit and remove it. Next, plug the new unit and then reverse the disassembly process. I could have done this in 10 minutes had I not been careful not to break anything. No special tools are required.
I didn't because the part was never delivered. The box was apparently damaged according to the tracking. Your company didn't bother to communicate that they couldn't send another one without a new order. They also didn't give a refund until I contacted them because they are just too busy. Your company was a huge waste of time. Publish that. Go ahead.
