Is your LG Refrigerators ice dispenser giving you trouble? It could be that the Dispenser Ice Chute Door DC Motor needs a replacement. This motor is an important gadget that allows the ice door on you...
The Water filter reduces contaminants such a s lead, iron, and chlorine from drinking water. Replace every 6 months or 200 gallons for best performance.
This capacitor provides the electrical boost needed for motors or components to start and run smoothly. Proper capacitance supports efficient operation and reduces strain on the system. Replacing a fa...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dee
July 5, 2021
My refrigerator 3 year old my refrigerator just shout down and stop work and all the ice melted what part do i need to buy thank you
For model number LSXS26326W
Hi Dee,
Thank you for your question. If your refrigerator will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the compressor starter and the compressor assembly. As the compressor is a high voltage part, you may need to have a qualified technician install it. We hope this helps! Good luck with the repair!
Leave the refrigerator or freezer is keeping proper temperatures
For model number LSXS26326W
Hello Irvin, thank you for contacting us. If your refrigerator or freezer is not maintaining proper temperature the most probable culprits are the temperature sensors, part number PS11760082, and part number PS11760081. We would recommend testing both sensors with a multimeter for continuity to pinpoint the fault. Please reach out to customer service if you need help placing an order. Glad to be of help!
This repair was easy. The ice maker assembly is basically a plug and play unit that requires first removing the ice bucket as described inside the freezer door. Next, remove several screws the support the unit, then gently lifting the ice maker assembly out, just far enough to access the 2 electrical plugs that operate the unit. Carefully unplug the old unit and remove it. Next, plug the new unit and then reverse the disassembly process. I could have done this in 10 minutes had I not been careful not to break anything. No special tools are required.
I didn't because the part was never delivered. The box was apparently damaged according to the tracking. Your company didn't bother to communicate that they couldn't send another one without a new order. They also didn't give a refund until I contacted them because they are just too busy. Your company was a huge waste of time. Publish that. Go ahead.
