LSG4513BD LG Range - Overview

Diagrams for LSG4513BD

See every part. Know exactly what you need.

Parts for the LSG4513BD

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Igniter – Part Number: MEE61841401
$317.43
In Stock
Oven Igniter
★★★★★
★★★★★
(5)
Part #MEE61841401
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner. If your igniter is faulty, you will likely notice that it does not glow, or it glows dimly, the flame is weak, or there is no ignition at all. If the igniter is cracked or visibly damaged in any way it is best to replace it to ensure your safety.
Read less
WINDOW,GLASS – Part Number: 4890W1N009H
$125.28
In Stock
WINDOW,GLASS
★★★★★
★★★★★
(2)
Part #4890W1N009H
This clear inner glass lets you see inside your LG oven while keeping the heat in. If your oven glass is cracked or chipped, replacing it helps restore energy efficiency and safe cooking. It’s made to fit specific LG models, so check your oven’s model number before installing. Easy to replace with basic tools.

Common Symptoms of the LSG4513BD

How this model fails, and the parts that fix it.

Gas igniter glows, but will not light
Fixed by
these parts
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Show All
Little to no heat when baking
Fixed by
these parts
Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven wouldn't ignite
11 of 22 people found this instruction helpful.
  • Martin from KEWASKUM, WI
  • Easy
  • 15 - 30 mins
  • Nutdriver
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
Was this helpful?
Thank you for voting!
Oven would not light
9 of 26 people found this instruction helpful.
  • Sheila from HOPKINTON, MA
  • Very Easy
  • 30 - 60 mins
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
Read less
Was this helpful?
Thank you for voting!
Both ovens would not light
1 of 2 people found this instruction helpful.
  • George from Meadows Place, TX
  • Really Easy
  • More than 2 hours
  • Screw drivers
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
Was this helpful?
Thank you for voting!
View More