LSC27950ST LG Refrigerator - Overview

Models starting with LSC27950ST

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Push Button Switch – Part Number: 6600JB3007E
$47.07
In Stock
Push Button Switch
★★★★★
★★★★★
(1)
Part #6600JB3007E
This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light comes on. When you close the door the switch is pressed in, and the light turns off. You may need a putty knife to remove your old switch.
Refrigerator Water Filter LT600P – Part Number: 5231JA2006F
$77.99
In Stock
Refrigerator Water Filter LT600P
★★★★★
★★★★★
(1)
Part #5231JA2006F
This OEM filter measures 2.5 inches deep, 12.5 inches high, 5 inches wide and roughly 1.5 lbs. It is recommended to replace this filter every six months or 300 gallons, whichever comes first. If you notice an unpleasant taste in your water or it suddenly dispenses much slower, these are also common indications that a replacement is necessary. It filters sediment, dirt, rust, cysts, lead, mercury, and more. For proper use, operating pressure should be 30-120 PS, operating temperature should be 33-100 degrees Fahrenheit, with a flow rate of 0.5 gallons per minute. Installation is quick and easy and does not require the use of tools.
Plastic Tube – Part Number: 5210JA3005E
$26.35
In Stock
Plastic Tube
Part #5210JA3005E
This part is the replacement water line or tube for your refrigerator. It is made of white plastic and is sold individually. This tube supplies water to the ice maker and water dispenser If your refrigerator is leaking, or it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged and use the union to attach the new water line to the old one. This tubing is an OEM part from the manufacturer.
Ice Maker Assembly – Part Number: AEQ36756901
$338.28
On Order
Ice Maker Assembly
★★★★★
★★★★★
(2)
Part #AEQ36756901
Tired of running out of ice? This complete ice maker kit is a simple way to get your fridge making ice again. It includes everything you need—the ice maker, housing, and control unit—to keep a steady supply of ice flowing. Just install it and enjoy fresh ice whenever you need it. It’s built to last and fits easily into compatible refrigerators, making it a hassle-free upgrade.
Micro Switch – Part Number: 6600JB3001C
$35.15
In Stock
Micro Switch
Part #6600JB3001C
Refrigerator Lever Spring – Part Number: 4970JA3011K
$13.15
On Order
Refrigerator Lever Spring
Part #4970JA3011K
Lever Spring – Part Number: 4970JA3011C
$13.15
In Stock
Lever Spring
Part #4970JA3011C
This genuine OEM lever spring exerts tension between the ice maker door plunger and the ice maker itself on your refrigerator. If there is little to no tension holding your ice door seal in place, the spring may be faulty. This spring is approximately 1-inch long. Remember to disconnect the power to your refrigerator before beginning this repair.
Plastic Tubing - 5/16 Inch – Part Number: MJU62070603
$29.65
On Order
Plastic Tubing - 5/16 Inch
Part #MJU62070603
This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or if it will not dispense water or ice, you may have a damaged water line. When you replace the water line, you may want to pick up a new water tube union as well. You can use a utility knife to cut the old water line where it is damaged, and use the union to attach the new water line to the old one. This tubing is sold individually and is an OEM part.
Light Bulb – Part Number: 6912JB2004M
No Longer Available
Light Bulb
Part #6912JB2004M
Guide,Rail – Part Number: 4974JA1105B
$24.95
On Order
Guide,Rail
Part #4974JA1105B
Holder,Bracket – Part Number: 4930JA3091A
$13.15
In Stock
Holder,Bracket
Part #4930JA3091A
Refrigerator Hinge Assemblylower – Part Number: 4775JA2113A
$56.05
In Stock

Common Symptoms of models starting with LSC27950ST

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Evaporator Fan Squeeking
17 of 21 people found this instruction helpful.
  • Kyle from WOODBURY, MN
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers, Wrench (Adjustable)
Detected noise as coming from top freezer department, and tips and part diagram clearly pointed to evaporator fan. You go in through the freezer (you have to empty top half of freezer); removing the side rails holding the ice bin, and then the 4 outer screws (only 2 each side - not the middle ones) holding the 'auger' that turns the bin . From there it gets interesting in trying to disconnect the wires. You might consider taking some pictures of the connected wires - perhaps it doesn't matter, but several of them can be hooked up in reverse. After the ice marker is out, remove light and light cover, side rails/mounts that hold hold up ice maker. This leaves a large white cover that pops out (seam at bottom of it has two tabs that you can pop out) holding the fan; and then only a few more wires to disconnect to be able to get at the fan. Mine clearly had a wobble to it confirming the source of the squeak and need to replace. Install was just reverse -- a bit tricky to get some of the wires connected given the tight spaces. Overall, not difficult - but a lot of wires and screws to connect/disconnect. I didn't take any pictures as I disassembled, and found myself having to take some extra time to figure it out as I reassembled. In the end -- a silent and functioning refrigerator Good luck!
Was this helpful?
Thank you for voting!
Ice maker bail frozen. Chose to replace the entire assembly
7 of 7 people found this instruction helpful.
  • John from HILLSBORO, OR
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Examined old ice maker. It is held by some Philips screws. There are many screws you don't need to unscrew so look carefully. Then disconnected th dual in line connector. There is a little push tab to squeeze to release. Then the ground is connected with a screw. It's a little hard to see but unscrew that. My replacement came with no instructions or screws so try not to drop the screws down in the netherlands of the fridge. The hardest part was maneuvering the icemaker to reattach the power and ground. Even with that pretty straight forward replacement.
Was this helpful?
Thank you for voting!
Ice dispenser door didn't close
7 of 12 people found this instruction helpful.
  • Wesley from WILTON, NH
  • Very Easy
  • 15 - 30 mins
  • Screw drivers
I replaced solenoid, flapper heated door, and broken spring. Very easy instructions on "YouTube"
Was this helpful?
Thank you for voting!