LSC27921ST (LSC27921ST /03) LG Refrigerator - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Handle Screw – Part Number: MJB63190001
$13.15
In Stock
Handle Screw
★★★★★
★★★★★
(2)
Part #MJB63190001
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.
Ice Tray – Part Number: 3390JA1150A
$16.45
In Stock
Ice Tray
Part #3390JA1150A
This part is the replacement ice tray for your refrigerator. The tray is made of white plastic and is approximately 9 inches in length, and 3 inches in width. It has the capacity for 8 ice cubes. The ice tray can be filled up with water and is the mold that shapes the ice cubes. If your current ice tray is cracked, warped, or if mineral deposits have settled inside it, it may cause the ice cubes to stick. This part is sold individually and is an authentic OEM part.
Micro Switch – Part Number: 6600JB3001C
$35.15
In Stock
Micro Switch
Part #6600JB3001C
Refrigerator Water Tube Fitting – Part Number: 4932JA3002A
$35.15
In Stock
Refrigerator Water Tube Fitting
Part #4932JA3002A
The water tube fitting connects lines that supply water to components such as the ice maker and water dispenser.
Stopper,Compressor – Part Number: 4620JA3015A
$13.15
Special Order
Stopper,Compressor
Part #4620JA3015A
Light Bulb – Part Number: 6912JB2004M
No Longer Available
Light Bulb
Part #6912JB2004M
Refrigerator Inlet Tube – Part Number: 5040JA2015A
$42.85
Special Order
Refrigerator Inlet Tube
Part #5040JA2015A
Guide,Rail – Part Number: 4974JA1105B
$24.95
On Order
Guide,Rail
Part #4974JA1105B
DC Motor – Part Number: EAU59551204
$64.85
In Stock
DC Motor
★★★★★
★★★★★
(1)
Part #EAU59551204
This ice dispenser door motor is a genuine replacement component designed to restore smooth and efficient operation to your LG refrigerator’s ice dispensing system. As a DC motor it controls the opening and closing of the ice chute door allowing ice to dispense properly while preventing warm air from entering the freezer compartment. A malfunctioning motor may result in the door not opening or closing correctly or in inconsistent ice dispensing. Compatible with select LG refrigerator models this OEM part ensures reliable performance and a precise fit. Installation should be performed with the appliance unplugged and may require basic tools.
Refrigerator Hinge Assemblylower – Part Number: 4775JA2113A
$56.05
In Stock
Refrigerator Plastic Tube – Part Number: 5210JA3005A
$20.85
Special Order
Refrigerator Plastic Tube
Part #5210JA3005A
Refrigerator Dispenser Lever – Part Number: MBG38252601
$13.15
Special Order
Refrigerator Dispenser Lever
Part #MBG38252601
The dispenser lever releases ice or water when you press the lever.

Questions And Answers for LSC27921ST

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Geno - For model number LSC27921ST
February 15, 2024
Changed water valve! No water to ice maker! Worked slow before!
Chris Boyle Profile
Hi Geno, thank you for reaching out. As you have already replaced the water inlet valve, we would recommend checking the water tube, part number PS3526623. It supplies water to refrigerator components that require water, such as the ice maker and water dispenser. You may need to replace it to fix the issue. We hope this solves your problem!
$20.85
Special Order
Refrigerator Plastic Tube
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the LSC27921ST

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The ice tray had warped and dumped water, which then froze down through the ice bucket and below.
8 of 8 people found this instruction helpful.
  • George from ATLANTA, GA
  • Easy
  • Less than 15 mins
  • Screw drivers
To replace the warped tray, I found the service manual (pg. 124 below) which took some interpreting.
Removed the lever. Then removed the assembly by two screws that are forward to the unit and go upwards.
The insulation, sensor, and sensor cover are simply pulled down and off and the unit separated to removed the tray, and then insert the new tray. Proceed in reverse. Takes only a few minutes.

/Users/grf/Desktop/fridge ice tray.pdf
Was this helpful?
Thank you for voting!
Replace Gasket on refrigerator door
6 of 10 people found this instruction helpful.
  • Curtis from DEMOPOLIS, AL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
The replacement gasket does not have as strong a magnet as the original one. I removed the old one carefully so as not to cause more damage in case I have to put it back. Using Tongue suppressor I pushed new gasket into place and put a thin coating of protelem jelly on the gasket. I just have to make sure the door is closed each time to be sure of good seal.
Was this helpful?
Thank you for voting!
Broken Guide Rail
4 of 6 people found this instruction helpful.
  • Nicole from BROOKSVILLE, FL
  • Very Easy
  • Less than 15 mins
  • Screw drivers
This site was awesome! I was able to very quickly look up my refrigerator model, find the proper part number, and order the part. The only suggestion I would make is to update the cut sheet with a more clear version, it was a little difficult to make out the part number because the scan/drawing was fuzzy, but I was still able to make it out. Got the part in the mail very quickly and it was super easy to remove the old rail and install the new one. Take out the screws from the old one, remove the old rail, line up the holes, install the new one, and put back the screws. It's so nice to have a site like this to fine parts and order them! Too cool! Thank you so much!
Was this helpful?
Thank you for voting!