This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
$59.35
In Stock
Order within the next 9 hrs and your part ships today!
This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for gener...
$317.43
In Stock
Order within the next 9 hrs and your part ships today!
Upgrade your oven with this durable gliding shelf rack, designed to provide a stable surface for baking, roasting, and broiling. Its smooth sliding design makes it easy to insert and remove dishes, of...
$99.52
In Stock
Order within the next 9 hrs and your part ships today!
Help your LG gas range get back to peak performance with the LG Valve Assembly. Designed just for gas ranges, this genuine LG part controls the gas flow to your right rear burner, ensuring the flame i...
$60.45
In Stock
Order within the next 9 hrs and your part ships today!
Order within the next 9 hrs and your part ships today!
Questions And Answers for LRG3081ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sherry
December 8, 2022
Oven does not heat to proper temperature and does not maintain temperature.
For model number LRG3081ST
Hi Sherry, thank you for reaching out. You need to check the oven sensor, part number PS6883927, to fix the issue. We hope this information helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
This range is 6 years old and I believe the oven igniter quite again this is going to be the 3rd one in 6 years is this normal the range is set up for lp gas
For model number LRG3081ST
Hi Martin, thank you for reaching out. According to our research, the oven igniter may last 6 to 8 years with normal gas, while with propane gas it may last 3 to 4 years. So, it is normal. The oven igniter for your model is part number PS3535362. We hope this information helps!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Andy
January 29, 2025
Oven doesn’t work at all, I changed the control board but still nothing
For model number LRG3081ST
Hello Andy, Thank you for contacting us. It could also be caused by a loose or faulty connection, so we would recommend checking the wiring harness with a multimeter. Good luck with your repair.
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Andy
January 28, 2025
Oven doesn’t operate at all
For model number LRG3081ST
Hello Andy, thank you for reaching out. We would recommend making sure that the appliance is receiving proper power. If the problem persists, then you may need to check the control board, part number PS11710554, to solve the problem. A faulty control board can cause the oven to not operate at all. We hope this helps!
Hello Gurvinder, thank you for reaching out. We would recommend checking the electronic control board, part number PS11710554, to fix the issue. We hope this helps!
Took off the oven door then took out the racks and two screws in the oven bottom and removed it . Then removed the heat deflector. Then un plugged the old igniter and removed the burner to make it easier to remove the old igniter. Then installed the new igniter and reversed the process
As soon as my husband put it in the oven, the very thin prongs broke. There was no guard on either side of the prongs for protection like the one that had been in there. Very costly to us of $185 with no fix. Very disappointed in that ignitor. It would have been an easy fix. Had replaced one previously but it only lasted 6 months. Now we have a new stove
Remove oven bottoms Removed burners Remove igniters Pull out oven removed back disconnect wiring Installed new parts on burner made wiring hook ups Installed oven back and oven bottoms Tested and both work Took so long because I’m 75 years old Thanks for the proper parts
