This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
Say hello to the DC Motor Assembly by LG ? your trusted partner in giving your refrigerator a fresh lease of life. This bona fide OEM part is tailor-made to slot perfectly into chosen LG refrigerator ...
This ice maker assembly is designed for use in select LG refrigerator models and includes all the essential components needed to produce and store ice efficiently. The unit features an ice mold, water...
This pipe holder secures tubing or piping in place to maintain proper alignment and routing. Its durable construction supports stable installation and reliable operation.
This fan assembly circulates air to regulate temperatures and support efficient operation. Proper airflow improves performance and helps protect internal components. Replacing a failing fan assembly r...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
November 28, 2023
Craft ice maker stopped working. Suggestions?
For model number LRFVS3006S
Hello Thomas, thank you for contacting us. Go to the control panel inside the refrigerator and check if the "craft ice" indicator is on. If the indicator light is off, turn this back on by pressing the "craft ice" button. When the craft ice maker is turned on, it will automatically be set to produce 1 batch of 3 craft ice every 24 hours. You can also set to produce 6 ice spheres a day. To do this, just press the "craft ice" button one more time to produce 6 ice spheres a day. To allow the setting that you want, leave the craft ice maker setting for 5 seconds to save what you want. If the craft ice maker is set properly and is still not creating ice spheres, check the feeler's arm at the top of your refrigerator. This is important. If the feeler arm is pushed up, the icemaker will stop producing ice to prevent any overflow. Be sure that the feeler arm is not obstructed and can move freely. If everything suggested is applied successfully, you may want to check if the refrigerator is connected to a drinkable water source. Be sure to check if the valve connecting to the water supply is fully open for water flow. If all checks are fine, and the issue still persists, we would recommend replacing the ice maker, part number PS12724823. Glad to be of assistance!
Turn off the power to the refrigerator. Remove the back plate. Unplug the fan motor. Remove the fan housing and pull the fan blade from the motor. Replace the motor by removing 4 screws. Replace with the new motor and reinstall the fan blades. Secure the fan housing, plug the fan motor, and screw on the back panel. Plug and go!
For the right side of the refrigerator door, just pulled off the old gasket and replaced it with the new one. Old gasket came off easily. Just had to pull it off. No screws on the right side. Just pushed the new one in place in the groove on the door.
For the left side, needed a Phillip’s screwdriver to remove the flap first. Helps to have a second person hold the door from moving. Once flap was off, pulled the old gasket off and installed the new one just like the right side. Then screwed the flap back on once the gasket was in the groove properly.
Initially after install, it seemed like the magnet on the door was not strong enough but after a couple of days, the magnet seems a lot stronger, sealing the air out. Very happy I replaced it. It was a lot simpler to replace than I thought it would be.
Once I U tubed the the removal and replacement of the gaskets it was super easy. The right gasket change was easy without tools. The left gasket required me to remove the mullion first, which is why I used Utube.
