This part is the replacement A/C fan motor or convection fan motor for your range. It is used to spin the fan blade, which circulates hot air through the oven, and ensures even heating. If you notice ...
$173.67
In Stock
Order within the next 4 hrs and your part ships today!
Order within the next 4 hrs and your part ships today!
Questions And Answers for LRE6383ST
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harvey
December 16, 2023
How do I identify the correct part number for the front left dual element burner on my LG glass top stove?
For model number LRE6383ST
Hello Harvey, thank you for your question. The Dual Element is part PS7795472. Thank you and have a great day.
Oven is not heating. I will set it for 375 and although it tells me it is ready, the internal temperature is only 250. I have to set the temperature for 450 - 500 to get the internal temperature close to 375. I have changed the temperature sensor but this didn't correct the problem.
For model number LRE6383ST
Hello Lyle, thank you for reaching out. Based on our understanding of the issue, we would suggest checking the control board, part number PS11773404, to solve the problem. Glad to be of assistance!
A few minutes after turning on the oven, it completely shuts off and trips the breaker. There are times when oven never shuts off. It shuts off more often than not. Stove top can be used without issue. Range is on its own electric source. Same one for years with no issue.
For model number LRE6383ST
Hi Pablo, thank you for reaching out. Based on the description, the issue is with the safety thermostat, part number PS3530468. It shuts off the range if it overheats. We would suggest replacing the thermostat to fix the issue. We hope this solves your problem!
When using the oven, the stove will completely shut off after about 10 minutes of use. this does not happen all the time but 8 out of 10 times.
It does not turn off if the stove top is being used, only when the oven is on.
For model number LRE6383ST
Hello Pablo, thank you for reaching out. According to our understanding, the issue is most probably with the relay control board, part number PS8751324. We would recommend replacing it to solve the problem. We hope this helps!
Part number for front right large stove burner for above stove. Is there a manual available that explains how to replace? Thanks
For model number LRE6383ST
Hello Bob, thank you for writing in. Our research has found, part number PS7795471 is the correct replacement burner for your model. We have included a video, it may not be your model but it is very similar. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know the process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution: 1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet. 2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Checked element no reading. Took off back panel and removed element. Took 5 days to get element. Put in new one. Took 20 minutes. Did not have to cut panel as video had shown. It had screws and was easy to get out and put the new one in. The new element was exactly the same as the old one. I checked all elements before ordering. Was satisfied with everything but the delivery time