LRE6383SB LG Range - Overview

Diagrams for LRE6383SB

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Temperature Sensor – Part Number: EBG61305805
$59.35
In Stock
Temperature Sensor
★★★★★
★★★★★
(5)
Part #EBG61305805
This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor internal temperatures and regulate heating or cooling elements accordingly. If your appliance is experiencing inconsistent temperature control, the sensor may be defective and can be tested using a multimeter for continuity. Refer to your user manual for exact placement and diagnostic procedures. Sold individually.
Microwave Thermostat – Part Number: 6930W1A003X
$33.93
In Stock
WINDOW,GLASS – Part Number: 4890W1N009H
$125.28
In Stock
WINDOW,GLASS
★★★★★
★★★★★
(2)
Part #4890W1N009H
This clear inner glass lets you see inside your LG oven while keeping the heat in. If your oven glass is cracked or chipped, replacing it helps restore energy efficiency and safe cooking. It’s made to fit specific LG models, so check your oven’s model number before installing. Easy to replace with basic tools.
Bake Element – Part Number: MEE62306405
$146.83
In Stock
FOOT – Part Number: 4778W1N001B
$21.95
In Stock
FOOT
Part #4778W1N001B
Range Radiation Heater – Part Number: MEE62385201
$198.03
Special Order
Range Radiation Heater
★★★★★
★★★★★
(3)
Part #MEE62385201
A dual radiant heater supplies heat to a cooking area beneath a glass cooktop. Replacement may be needed when one zone does not warm, only the inner or outer section works, or the element has a visible break. Normal radiant burners cycle on and off, so cycling alone does not prove a failure. Check the control switch and connections first, then match the replacement by full model number, location, size, mounting points, and electrical rating. Disconnect the range at the breaker and confirm the circuit is dead before service. Handle sharp metal edges and the glass top carefully, and return every bracket, shield, and wire to its original position.
HEATER,SHEATH – Part Number: MEE62306504
$142.24
In Stock
HEATER,SHEATH
★★★★★
★★★★★
(1)
Part #MEE62306504
This genuine heating element fits select LG ovens and ranges, providing heat for broiling and baking. Located at the top of the oven, it ensures even cooking and reliable performance. It replaces older versions and installs easily once the appliance is unplugged. Always confirm compatibility with your model before purchase.
Display Power Control Board – Part Number: EBR64624906
$99.03
In Stock
Relay Control Board – Part Number: EBR74164805
$153.93
In Stock
HEATER,SHEATH – Part Number: MEE32902206
$65.95
In Stock
HEATER,SHEATH
Part #MEE32902206
This sheathed heater provides controlled heat for appliance operation while protecting internal components. Its protective casing supports durability and consistent heating performance.
Oven Rack – Part Number: MHL63411403
$124.28
On Order
Common Nut – Part Number: 1NHB0500032
$13.15
Special Order
Common Nut
Part #1NHB0500032

Common Symptoms of the LRE6383SB

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Hammer 1, Glass range top and heating element 0
24 of 56 people found this instruction helpful.
  • Richard from CHESAPEAKE, VA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution:
1) Put something between the range top and range - like a sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet.
2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Was this helpful?
Thank you for voting!
Plate Assembly Replacment
3 of 6 people found this instruction helpful.
  • Norman from ST PETERSBURG, FL
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
1. Unplug the stove (you will need 1 person to assist).
2. Remove the 3 assembly screw (Philips screws) located underneath the front of the assembly, near the oven door.
3. Raise the plate assembly to expose the heating elements (Take a photo of the positioning for installation reference).
4. Remove the wires connected th e heating elements (unclip the connectors only).
5. Remove the holding clips from the heating elements (2 clips on each elements, the large element has 1 clip and 1 screw).
6. Remove the elements only (leave the wires in place).
7. Remove the Plate Assemble (save the 2 black rubber mounts located on the sides, the new assembly dose not come with replacements) .
8. Now your are ready to reinstall the Plate Assembly, so do the reverse and you should have no issues (check your photo for proper installation).
Was this helpful?
Thank you for voting!
PartsSelect substituted the part and it will not work
1 of 2 people found this instruction helpful.
  • Rita from CROSS PLAINS, WI
  • Very Difficult
  • More than 2 hours
The repair person could not complete the job as the part sent is totally wrong for the appliance. The company has not responded to me email sent 12/30/23 and there is no way to leave a voice mail or ask for a call back, due to large call volume. A live representative does not answer the phone.

Please check your emails. You ask for feedback on repair, but obviously do not take time to check emails for issues. Because the error is on the part of PartSelect I requested an RMA to return an incorrect part. Please respond by sending a shipping label so it can be returned for a refund. I have submitted a dispute with the credit card company since your company is negligent in customer service. Please email RMA shipping label to [email protected]
Was this helpful?
Thank you for voting!