This temperature sensor, also referred to as a thermistor, is a genuine replacement component compatible with various appliance models. It works in coordination with the control board to monitor inter...
This clear inner glass lets you see inside your LG oven while keeping the heat in. If your oven glass is cracked or chipped, replacing it helps restore energy efficiency and safe cooking. It’s made to...
Upgrade your oven with this durable gliding shelf rack, designed to provide a stable surface for baking, roasting, and broiling. Its smooth sliding design makes it easy to insert and remove dishes, of...
This control board sub assembly manages essential appliance functions, ensuring smooth operation and accurate performance. Ideal for replacing a faulty board that causes error codes or unresponsive co...
Very easy.1: Shut power to stove. 2: Remove 3 hex screws from oven to range top at underside of top. 3: Raise to from front and disconnect multi- connector at right rear of top. 4: flip over top and demoed 4 screws on hold down strap at each side. 5: Remove element from under strap. 6: Disconnect element from wires./ remember where wires were connected. Connect multi connected from stove. 7: Replace strap and flip top, screw it back on, put power back on. Only about 30 minutes even if you get a coffe break. Don’t even have to move stove.
Removed the back of the Range. Removed one wire at a time from the old PCB and placed it in position on the New PCB. Then secured the New PCB in the holder.
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order from PartSelect again.
