Having trouble with your LG fridge's ice or water dispenser? We have a solution: the Refrigerator Ice Water Line Tube Assembly is ready to get your fridge back in top shape. Why is this part crucial...
Designed for efficient ice production, this ice maker assembly includes the ice mold and control unit that work together to freeze and release ice. Water enters through the inlet valve and is held in ...
This door stopper is a replacement component designed to limit door movement and protect hinges and surrounding surfaces. It is commonly replaced when worn or damaged and helps ensure smooth, controlled door operation.
This temperature sensor monitors internal conditions and provides accurate feedback to the control system. Precise sensing helps maintain stable performance and efficiency. Replacing a faulty sensor r...
This PTC thermistor assembly plays a crucial role in maintaining your refrigerator’s performance by regulating internal temperature and assisting with compressor start-up. Designed for select models, ...
Refrigerator Air Filters are a key component for neutralizing odors and ensuring a fresh stream of air into your refrigerator. Swapping your old filter out for a fresh one isn’t difficult and should t...
If your fridge isn’t making ice like it used to, the gasket on the ice bank door might be the problem. This replacement part helps keep warm air out so your ice stays solid and your fridge runs effici...
$108.50
In Stock
Questions And Answers for LPXS30866D
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim
March 25, 2023
I can not find the on/off switch for the ice maker.
For model number LPXS30866D
Hello Jim, thank you for contacting us. The ON/OFF switch for the ice maker is on the display board of the refrigerator. The switch is integrated into the display board, part number PS11710913. We hope this information helps!
Hi Tam, thank you for getting in touch. According to our research, your refrigerator is having this problem because of a faulty water inlet valve, part number PS3618979. We recommend checking the water inlet valve to fix the issue. We hope that helps!
Hello Tam, thank you for reaching out. We would recommend replacing the water inlet valve assembly, part number PS3618979, to fix the issue. The water inlet valve assembly supplies water to the refrigerator ice maker and water dispenser. We hope this sorts out your problem!
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
For this model the ice maker is very easy to replace. All it takes is a phillips head screwdriver. There are two wire connections you have to unplug. Easy out easy in. You do not have to disconnect the water line, just make sure the line is lined up correctly when you reinstall the new icemaker. It seems to take approximately 8 hours before you start getting ice again. If you have this same model, you already know this ice maker is very slow in making ice and is not able to keep up with daily usage of ice for a household of 3.
The heavy work is moving the fridge, then take off the lower plans. Use a bowel or cup for screws and the water line connector spacers so you don't loos them. undo connections holding water line, including the bottom brakes for the solenoid. Reuse the spring around the lower waterline to prevent external wear on the line.
NOTE: remove the waterline connector spacers and save! NOTE: you must compress (not pull) the connect to then pull the waterline out of the connectors. NOTE: You must also remove the water filter and housing inside the fridge but this is easy. MOTE: Test the line for leaks by turning on the water and then using the door water. The filter will need to refill so it may take a minute before water comes up. This line only have pressure when the door water is used or the ice maker needs to make ice.
After replacing the line, test the line for leaks by using the door water so the solenoid fills the lines
