This air filter helps keep your fridge smelling fresh and your food lasting longer. It uses carbon to trap odors and clean the air inside your refrigerator. If you notice bad smells or your fridge tel...
$67.74
In Stock
Order within the next 6 hrs and your part ships today!
Refrigerator door bin AAP73252202 is an original equipment manufacturer (OEM) part that fits some Kenmore Elite bottom-freezer refrigerators in the following series: 7957204, 7957205, 7957209, 7957218...
$95.12
In Stock
Order within the next 6 hrs and your part ships today!
This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your...
$18.96
In Stock
Order within the next 6 hrs and your part ships today!
This refrigerator door shelf bin is a clear, gallon-sized storage accessory designed for installation on the right-side door of select refrigerator models. Crafted from durable, food-safe resin, it fe...
$79.89
In Stock
Order within the next 6 hrs and your part ships today!
This wiring harness is 20 pin and 3 pin. Replacement ice maker for LG refrigerators. The ice maker assembly contains the mold to form ice and the ejection controls to fill the ice storage bin. Unplug...
$275.18
In Stock
Order within the next 6 hrs and your part ships today!
This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refri...
$28.96
In Stock
Order within the next 6 hrs and your part ships today!
This pipe holder secures tubing or piping in place to maintain proper alignment and routing. Its durable construction supports stable installation and reliable operation.
$18.96
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for LMXC23746D
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jin
April 5, 2023
NEED NEW COMPRESSOR SYSTEM. JUST 5YEARS OLD THIS KIND PROBLEM IS COMMON OR USUALLY?
WHAT IS LABOR CHARGE ?
For model number LMXC23746D
Hi Jin,
Thank you for your question. We are a parts distributor, we do not have appliance repair technicians that would come out and install the compressor for you. We would recommend checking locally to see if there is a technician in your area. If you need to order a compressor for your refrigerator, the part number listed for it is PS12739218. If you have any questions, please let us know. We look forward to hearing from you!
water dispenser would at times and not at other times. Now it stopped working at all. what i can replace to get it to work again.
For model number LMXC23746D
Hi Jean, thank you for getting in touch. Based on our understanding of the issue, we would suggest checking the water dispenser button, part number PS8748092, to solve the problem. We hope that helps!
Recently replaced ice maker assembly. The new unit acts the same as the original part. It gets stuck in the “dump” position for a long time. When it releases to fill position it doesn’t refill with water. What’s the next item to check? Is it possible I received a defective ice maker?
For model number LMXC23746D
Hi Tim, thank you for contacting us. Ensure that the ice maker has been installed correctly. It is quite possible that you may received, the defective ice maker, but it is very rare. We would suggest checking the water inlet valve, part number PS3618979. It regulates water flow to the icemaker and dispenser. We hope this sorts out your problem!
Shut off water supply. Disconnect main supply line. Remove rear lower panel on back of refrigerator. Remove all tubing clamps on back. Disconnect leaking tubing from water supply valve. Remove water filter and unscrew/remove water filter housing. Replace tubing - connect to water filter housing then to water supply valve. Reconnect filter housing and filter. Reinstall lower panel, then main water supply line, then all tubing clamps. Turn water back on and check for leaks after discarding several glasses of water to fill filter. Job complete!
The heavy work is moving the fridge, then take off the lower plans. Use a bowel or cup for screws and the water line connector spacers so you don't loos them. undo connections holding water line, including the bottom brakes for the solenoid. Reuse the spring around the lower waterline to prevent external wear on the line.
NOTE: remove the waterline connector spacers and save! NOTE: you must compress (not pull) the connect to then pull the waterline out of the connectors. NOTE: You must also remove the water filter and housing inside the fridge but this is easy. MOTE: Test the line for leaks by turning on the water and then using the door water. The filter will need to refill so it may take a minute before water comes up. This line only have pressure when the door water is used or the ice maker needs to make ice.
After replacing the line, test the line for leaks by using the door water so the solenoid fills the lines
