LMX25988ST (LMX25988ST /00) LG Refrigerator - Overview

If your fridge doors aren’t sealing properly or you’re noticing cold air escaping, this front plate assembly might be the fix. Also called a mullion or flipper, it fits between the French doors to keep the cold in and your food fresh. Made for select LG and Kenmore models, it’s built from sturdy plastic and helps your fridge run more efficiently. Just check your model number to make sure it’s the right fit.

This crisper shelf glass is a genuine replacement component designed to fit over the crisper drawers in side-by-side refrigerators. Made from durable tempered glass it provides a stable and transparent surface for organizing food and beverages while enhancing visibility within the fresh food compartment. The shelf helps maximize usable sp...Read moreace and supports the weight of various items without bowing or cracking. It serves as a direct replacement for broken chipped or warped shelves restoring both function and appearance. Installation is simple and requires no tools. Always verify compatibility with your specific refrigerator model before replacement.

This includes the primary and secondary valves along with the wire harness.

The door bin on your refrigerator is attached to the inside of the refrigerator door, and is designed to hold food and beverage items. It is made of white and clear plastic, and is approximately 14 inches wide. This is an authentic LG replacement part sourced directly from the manufacturer. Sold individually.

This door switch is used in refrigerators. It is activated by the closing and opening of the door

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.

This is an ice maker assembly kit designed for use within LG refrigerator-freezers. Ice makers are made to pull water from the water line, freeze it, and then store it in the form of cubes to be dispensed or crushed, depending on your preference and the model of the refrigerator. This assembly comes with the entire ice-making assembly, no...Read moret the portion that stores and dispenses the ice cubes from the dispenser. If your current ice maker is simply not making enough ice or any at all, or is broken or damaged in any way, it must be replaced. This ice maker assembly is made entirely of durable white plastic and connects via its single wire harness and features an on/off switch that needs to be turned on for it to function. This assembly is sold individually and does not come with any other ice maker parts.

This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is sugges...Read moreted to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.

This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.

This refrigerator door gasket is a durable, flexible rubber seal designed to create a tight closure around the door, helping maintain proper temperatures and overall cooling efficiency. It replaces worn or damaged gaskets that can cause cold air leaks, excess moisture, or door sweating. The gasket is shaped for a precise fit along the doo...Read morer frame, restoring an even, reliable seal once installed. Installation is typically straightforward—warming the gasket slightly can help it seat properly, and then it can be pressed into the existing groove around the door to ensure a smooth, secure fit.